Stainless steel top chain TRU type
- Chain pitch
19.05mm - Sideflexing
- Conveyor chains for sideflexing with float-preventive attachments (tabs)
- Higher allowable load than TTU type.
Features
- ・Base chain available in SS series. (SS Series :All parts 18-8 stainless steel )
- ・Can use RS60 sprocket (teeth 19T or more).
■Application
The following are the industries we recommend.
May not be used depending on conveying capacity (conveyor speed), material to be conveyed (weight, shape), environment and application.
Use as a guide when selecting.
Contact us if there are any applications or conditions not described.
Recommended industry /Conveyed material size (●:Recommended ○:Can be used △:Varies depending on conveying conditions. )
Conveying size (Weight ) |
Industry | ||||||||
---|---|---|---|---|---|---|---|---|---|
Can manufacturing | Beverages | Tire | Mechanical parts | Logistics | Pharmaceuticals | Bakery/Food | Secondary battery | Semiconductor ・ Solar panel related |
|
High | △ | ● | △ | ● | ● | ● | ● | △ | △ |
Medium | △ | ● | △ | ● | ● | ● | ● | △ | △ |
Low | △ | ● | △ | ● | ● | ● | ● | △ | △ |
Application
- ■Conveying containers for food, bottles, etc.
- ■Ideal for layouts with longer conveying distances, or for conveying heavy loads
List of Models
■Chain specifications
- ・Standard Series :
本体チェーンが鋼製で、トッププレートは18-8ステンレスを使用しています。
- ・NP Series (Ni plating ):
Base chain of NP series is nickel-plated to standard series. Nickel plating makes for a better appearance, and is hard to rust.
- ・SS Series :
All parts of base chain are 18-8 stainless steel and can be used in environments where corrosion resistance is a priority.
Note )Contact a Tsubaki representative if the chain will be used in special atmospheres.
※Click "model" for more information
Chain pitch mm | 19.05 |
---|---|
Application | Sideflexing |
Chain type | - |
- | |
Base chain specifications | - |
Pin type | - |
Pin material | - |
Pin shape | - |
Top plate thickness mm | - |
Material of the pusher | - |
Other functions | - |
Model | TRU |
Chain width mm | 55.0, 63.5, 76.2, 82.6, 101.6, 110.0, 114.3, 127.0, 152.4, 165.1, 190.5 |
Formation units | - |