Large size conveyor chain
Large size conveyor chains are chains with a wide operational range: they can transport in any direction in any combination freely - horizontal, vertical, inclined, etc., do not require special materials for temperatures up to about 200°C, use heat-resistant steel for higher temperatures, and have corrosion and chemical resistant specifications against water and chemicals.
It can carry almost any materials, from powders such as pulverized coal and cement to granular products such as wheat and soybeans, lumps such as ores and rocks, and products weighing several tones each, with few restrictions on what can be transported.
What's New / Product Information
Construction
New launch in October 2023
Screw Lock Link
Connecting link for safe and quick operation.
Note) The pin length is longer due to the nut method. Please make sure that there is no interference with the device.
※Total length tolerance for large size conveyor chain is +0.25%.
■Slip fit
When the shafts (pins and bushes) and holes are fitted together, there is always a loose fit.
This is a fit where the range of hole tolerance is larger than the range of shaft (pin or bushing) tolerance.
■Press fit
When the shafts (pins and bushes) and holes are fitted together, there is always an interference fit.
This is a fit where the range of hole tolerance is smaller than the range of shaft (pin or bush) tolerance.
See more about components and their roles
1.Pin (CP) | 2.Bush (B) | |
---|---|---|
The most important role of the pin is connecting the inner link to the outer link. Along with the plate, it receives chain tension along the direction of travel while receiving vertical reactive forces from the conveyed items. The outer diameter of the pin suffers wear from sliding against the bush inner diameter when the chain articulates. The pin is an essential strength bearing part and requires high wear resistance. | The bush is a strength bearing part, receiving tension from the chain during sprocket engagement, but its main role is as a bearing part. The outer diameter of the bush suffers wear from sliding against the roller inner diameter during roller rotation, while the bush inner diameter suffers wear from sliding against the outer diameter of the pin when the chain articulates. Bush inner diameter wear is directly expressible as pitch elongation. | |
3.Roller (R-R, F-R, S-R, M-R, N-R) | 4.Plate (PLP-A, PLP-B, BLP) | |
Forms a slip fit with the bush. Rotates when engaging with the sprocket, while alleviating the shock and wear from the teeth. Rotation also lowers running resistance. | The plate mainly receives the tensile load along the chain's direction of travel while receiving vertical reactive forces while supporting the conveyed item. The outer plate and inner plate slide against each other during chain articulation, as well as against the sides of the sprocket teeth during sprocket engagement. Outer plate holes are either round or flat. | |
5.T-pin (T-PIN) | 6.Attachments | |
After the outer plate is press-fitted to the pin, A T-pin is inserted and bent to prevent the pin from falling out.Bend 30º or more, or so that the end of the T-pin does not exceed the height of the plate. | For attaching items to the chain. See "Attachment types" below for the types of attachments. |
■Basic 3 dimensions of chain
The pitch, roller diameter, and inner width of the inner link are considered the basic three dimensions of a roller chain. When these dimensions are identical, a roller chain and sprocket are dimensionally compatible.
See more about attachment types
Attachments are parts for attaching conveying jigs to chains. They can be assembled at any desired spacing.
Standard attachment
Standard attachments are both economical and versatile.
A attachments
A attachments are bent on one side of the chain.
They are referred to as A1, A2, or A3, depending on the number of bolt holes.
A1 attachment
A2 attachment
A3 attachment
K attachments
K attachments are bent on both sides of the chain.
They are referred to as K1, K2, or K3, depending on the number of bolt holes.
K1 attachment
K2 attachment
K3 attachment
GA attachment
GA attachments have a hole in the link plates on one side.
Referred to as GA2 or GA4, depending on the number of bolts holes.
GA2 attachment
GA4 attachment
Special attachments
Special attachments for various applications.
Deep link
Top roller
Outboard roller
Flow
Integrated Attachment Chain
Wide variety of Integrated Attachments.
SA attachments
Straight attachment on one side
SK attachments
Straight attachments on both sides
CA2 attachments
Used to attach a net or slat with no spacing
AA3 attachments
Strong type, attachment fits between the plates.
AR2 attachments
A attachment with increased flexural rigidity
(w/reinforcing ribs )
MG2 attachments
Allows for one mounted jig to be used
AS2 attachments
For scrapers or flights
AF2 attachments
For deep scrapers or flights
WSA0 attachments
Prevents conveyed items from spilling
With extended pins
Objects can be attached to the pin end
(Model : EN)
Stay Pin
Item can be directly laid on stay pin, or mesh, etc. can be attached
(Model : TN)
Top plates
Prevents damage to conveyed items
(Model : TP)
Trolley rollers
Used in long distance, horizontal applications
(Model : TRO)
Outboard rollers
Provides support for heavy loads
(Model : RO)
Guide shoes
Prevents lateral movement
(Model : GS)
Guide Roller
Used in horizontal applications
(Model : GR)
Fixed dogs
Conveys by pushing
(Model : KD)
Dog rollers
Conveys round items by pushing
(Model : RD)
Tilting dogs
Can accumulate items on top of the conveyor
(Model : CD)
Roller tilting dogs
Can accumulate round items
(Model : RCD)
Ducking dogs
Conveyed item will remain in fixed position
(Model : DD)
Roller types
Large size conveyor chains come with three basic roller types, depending on the application.
Basic Roller Types for Large Size Conveyor Chain | ||
---|---|---|
R-roller | F-roller | S,M,N-roller |
|
|
Works to alleviate shock and wear when engaging the sprocket.
|
See more about roller guide methods
The following are examples of methods for guiding rollers on the drive and return sides for smooth large size conveyor chain operation.
Guide Methods
R roller (S roller) chains | F-roller chain | Outboard Roller Chains | |
---|---|---|---|
Drive side | |||
Return Way |
Safety precautions
Never weld additional parts onto an assembled chain. Doing so may cause chain kinking or twisting due to plate deformation, further reducing part hardness and leading to embrittlement fracture from the welding heat.
Large size conveyor chain
- General-purpose・Heavy duty
- Environment resistant
- Bearing roller
conveyor chain - Cement Conveyance
- Steel Facilities
- Biomass
- Waste Disposal Facilities
- Food Industry
- Water Treatment Facilities
- Automotive Industry
- Special
- Application devices
Accessories
Large size conveyor chain - Application devices
Includes Toughrollers, which are made of a frame unit and endless rollers and are perfect for moving, transferring, or conveying heavy items, as well as an axle bearing roller with cylindrical bearings embedded in rollers.
Automatic conveyor chain lubricator is also available.
Toughroller
Model No. TUF~
Consisting of a frame and endless rollers, with the endless rollers wrapped around a center plate on the frame. Perfect for conveying, transferring, or moving heavy objects.
- ・Steel Roller Type (Basic Load Allowance 14.7kN~1961kN)
Steel roller Toughroller is a compact device with a high load allowance made from a tempered center plate and rollers. - ・Plastic Roller Type (Basic Load Allowance 2.94kN~34.3kN)
Plastic Toughroller uses engineering plastic for its rollers, which gives it increased functionality over the basic features of steel rollers. And Tsubaki's Plastic Toughroller Jr. is an economical, lightweight, simple design for easy use.
Size
Steel Roller Type
TUF-J~TUF200
Toughroller Jr.
TUF-JP
Plastic Roller Type
TUF1P~TUF4P
Double Roller Type
TUF25W-ESP-TTB・TUF4WP-ESP-TTB
Axle Bearing Roller
Model No. JB□□□-□~
Axle bearing rollers have cylindrical bearings in the rollers.
Perfect for conveying, transferring, or moving heavy objects.
- ・Perfect for conveying, transferring, or moving heavy objects, and is ideal for wheels and guide rollers.
- ・Lubed, lube-free, water resistant and heat resistant specifications are available.
- ・JBR:R-roller
- ・JBF:F-roller type
- ・JBFF:Dual frange roller type
- ・JBTF:F roller type with 5 ° taper
- ・JBUR:Urethane roller
Chain Series
Lubed specifications (Standard package ),
Lube-free specifications ,
Waterproof Type , Heat-resistant package
Size
JBR03~JBR36
JBF03~JBF36
Axle Type
1 Type , 2 Type
Roller type
BR-roller , BF-roller ,
BFF-roller , BUR-roller ,
BTF-roller
Attachment Bearing Roller
Model No. AB□□□-□~
Axle bearing rollers with attachments have cylindrical bearings in the rollers.
- ・Perfect for conveying, transferring, or moving heavy objects, and is ideal for wheels and guide rollers.
- ・Lubed, lube-free, water resistant and heat resistant specifications are available.
- ・ABR:R-roller
- ・ABF:F-roller type
- ・ABFF:Dual frange roller type
- ・ABUR:Urethane roller
Chain Series
Lubed specifications (Standard package ),
Lube-free specifications ,
Waterproof Type , Heat-resistant package
Size
ABR03~ABR36
ABF03~ABF36
Roller type
BR-roller , BF-roller
BFF-roller , BUR-roller
Large size conveyor chain - Accessories
Automatic conveyor chain lubricator is available, in which chain rollers push up on a lubricator pump's checker arm to activate a pump mechanism and discharge an appropriate amount of lubricant from nozzles.
Automatic Conveyor Chain Lubricator
Model No. TCL□-L・R~
No electric or other power source is required, making installation easy and accurate, stable lubrication possible.
- ・As chain rollers push up on a lubricator pump's checker arm, it activates a pump and allows an appropriate amount of lube to discharge from nozzle.
- ・No Power Source Required :
Lubricator pump is activated when a chain runs, making electric, air, or other power sources unnecessary. Installation and maintenance are a snap! - ・Correct Lubrication :
Lubrication is in tandem with chain operation for correct, stable lubrication every time. - ・Compact, Low Price :
Lighter and more compact than existing conveyor chain lubricators, making it easy to handle and cost effective.
Size
TCL2L, TCL2R
TCL4L, TCL4R