Tsubaki Products

Selection Guide 　Top chain

・Click an icon to see the features of each model No.

・Selecting a condition will mask inapplicable model No.

Industry and Food Sanitation Act Compatibility Icons

Recommended industry An icon is displayed when you open the details of each specification.

Food Sanitation Act (Japan’s Ministry of Health Notification No.370) This icon indicates food sanitation act approval


Can manufacturing	Beverages	Tire	Mechanical parts	Logistics	Pharmaceuticals	Bakery/Food	batteries	Semiconductors/Solar panels	Conforms to Food Sanitation Act

Note) Note: Use may be restricted under certain conditions such as speed, conveyed products, weight, environment, or application.
Contact us if there are any applications or conditions not described.

Chain type 　

Plastic modular chain (wide type) 　　 Plastic top chain 　　　 Snap cover chain
Plastic modular chain (Mold-to-Width type) 　 Plastic block chain

WT0405
-W

WT0705
-W

WT1505
-K

WT1505
RN-K

WT1505
G-K

WT1505
GTO-K

WT1505
GTORN-K

WT1506
-K

WT1515
-W

WT1515
F-W

WT1515
T-F-W

WT1516
F-W

WT1516
T-F-W

WT1515
VG-W

WT1515G
-W

WT1516
-W

BTN5

BTN5
-A

BTC6

BTC6
RN

BTCP6

BTC6
-T

BTC6
RN-T

BTO6

BTO6
RN

BTN6

WT1907
-K

BTC8

BTC8
-A

BTC8S

WT2525-K

WT2525
VG-K

WT2250
FG

WT2250FG
With flights

WT2250
VG

WT2505
-K

WT2506
-K

WT2515
-W

WT2515G
-W

WT2515F
-W

BTM8H

WT2705
-K

WT2706
-K

WT3005
-K

WT3005
G-K

WT3086
-K

WT3086
G-K

WT3109
-W

WT3816
-K

WT3827
-K

WT3835
-K

WT3835
RN-K

WT3835
-T

WT3835
TRN-K

BTH16

WT5707
-K

WT6306
-W

WTU3015
T-K

WTU3015
T-K-SUSP

WT0705
-M

BTC4
-M

WT1505
G-M

WT1505
GTO-M

WT1505
TOD-M

WT1515
G-M

BTC8
H-M

BTM8
H-M

WT2505
-M

WT2505
G-M

WT2515
G-M

WT2525
-M

WT2525
VG-M

WTM2535
G-M

WT2505
TOD-M

BTO8
-M

WT3005
G-M

WT3086
G-M

WT3835
G-M

TTP

TTP
-P

TTPH

TTPH
-P

TTPT

TTPDH

TTPM

TPF

TP
-OTD

TPS

TPS
-P

TPH

TPH
-P

TPSS

TPM

TPM
-SN

TPM
-P-SN

TPRF
2040

TPRF
2060

TTUP

TTUP
-P

TTUP
-M

TTUPT
-M

TTUPH

TTUPS

TTUPS
-H

TTUPM
-P

TTUPM
838H

TPU

TPU
-P

TPU
-LH

TPUT
-LH

TPUS

TPUM

TPUMF
1200-T

TPUMF
1200-TB

TPUMF
1200F-T

TPUH
-BO

TPU
-USR

TTUP
-LLPC

TPUSR
550

TPUSR
550P

TPUSR
826

TPUSR
826P

TP
-UB36

TPUN

TPUN550
-LH

TPUN535
-LH

TP-50UNS

TP-50UNS
-D76

TP-50UN
-T95

TPCC420

TPCC420
-T

TORP・
TOSP

TP
-36AK

TNU

TP
-PT

TP
-PTS

TP
-1873-T

TP
-1843-G

TP
-1873-G

TTPDH
-LBP

TPUS
-LBP

TPUS953Y
-T-LAP

TP-30UTW
-LAP

TP-36UTW
-LAP

RSP

RSP
-P

RSP
-SL

RSP
-PO8PF

RSP
-PO8PFT

RSP
-2

RSP
-CU

RSP
-P-CU

RSP40
-T-CU

RSP
-CU-2

RF-SC
RS-SC

(Drag to move. )

Plastic modular chain (wide type)

WT1505-K


Pitch mm	15
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1505G-K


Pitch mm	15
Chain width mm	152.4 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1505GTO-K


Pitch mm	15
Chain width mm	235.6 ～ 1531
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Extended plate edges facilitate smoother right-angle transfers. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1506-K


Pitch mm	15
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTN5


Pitch mm	15
Chain width mm	76 ～ 1520
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. 30% open area ratio means easy washing and clean-up. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTN5-A


Pitch mm	15
Chain width mm	76 ～ 1520
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. 30% open area ratio means easy washing and clean-up. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC6


Pitch mm	19.05
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTCP6


Pitch mm	19.05
Chain width mm	76.2 ～ 1524
This is the open hole version of the BTC6. Using these holes allows for vacuum conveyance of goods. Snap attachment used on lock pin retention system allows easy installation and maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC6-T


Pitch mm	19.05
Chain width mm	609.6 ～ 1524
This version of the BTC6 has float-preventive tabs to prevent the chain from floating above the frame. Snap attachment used on lock pin retention system allows easy installation and maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTO6


Pitch mm	19.05
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTN6


Pitch mm	19.05
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers. Simple construction with four parts allows for easy part replacement and reduced maintenance time. 53% open area ratio means easy washing and clean-up. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1907-K


Pitch mm	19.05
Chain width mm	228.6 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC8


Pitch mm	25.4
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC8-A


Pitch mm	25.4
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC8S


Pitch mm	25.4
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2250FG


Pitch mm	25.4
Chain width mm	85 ～ 1700
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2250FGWith flights


Pitch mm	25.4
Chain width mm	85 ～ 1700
Flight for inclined conveyor of bulk materials that can be attached on WT2250FG. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2250VG


Pitch mm	25.4
Chain width mm	85 ～ 1700
Features rubber pads on the conveying surface -- ideal for inclined box conveyance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2505-K


Pitch mm	25.4
Chain width mm	76.2 ～ 3048
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2506-K


Pitch mm	25.4
Chain width mm	76.2 ～ 3048
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTM8H


Pitch mm	25.4
Chain width mm	152.4 ～ 1524
Magnets embedded in the links enable inclined conveyance by holding conveyed (magnetic) objects to the link surface. Because no fl ights are used, it prevents damage caused by friction between the conveyed goods and the flights. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2705-K


Pitch mm	27.2
Chain width mm	228.6 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2706-K


Pitch mm	27.2
Chain width mm	228.6 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3005-K


Pitch mm	30
Chain width mm	76.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3005G-K


Pitch mm	30
Chain width mm	152.4 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3086-K


Pitch mm	30
Chain width mm	170 ～ 1530
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3086G-K


Pitch mm	30
Chain width mm	170 ～ 1530
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3816-K


Pitch mm	38
Chain width mm	200 ～ 3500
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3827-K


Pitch mm	38.1
Chain width mm	457.2 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3835-K


Pitch mm	38.1
Chain width mm	152.4 ～ 1524
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTH16


Pitch mm	50.8
Chain width mm	400 ～ 1600
High-rigidity chain provides the highest maximum allowable load for Plastic Modular Chain (62 kN/m). Suitable for conveying bulk quantities or heavy objects. A special relief pattern embossed on the top surface of the chain provides an anti-slip effect. Its design acts to minimize slippage and works to prevent objects from becoming snagged on the chain surface. Slide lock pin retention system allows easy installation and maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT5707-K


Pitch mm	57.15
Chain width mm	457.2 ～ 3048
Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities. Simple construction with four parts allows for easy part replacement and reduced maintenance time. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

BTC4-M


Pitch mm	12.7
Chain width mm	50
Small chain pitch of 12.7mm is ideal for conveying small, lightweight containers. Underside of links is curved, allowing the chain to wrap around 18mm diameter shafts and effectively reduce the dead space between conveyors. Unique multi-hinge link construction ensures smooth accumulation and smooth transition between conveyors. All-plastic construction means the chain is lightweight and easy to handle, and eliminates the need to sort and separate for waste disposal. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT1505G-M


Pitch mm	15
Chain width mm	75.8
Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT1505GTO-M


Pitch mm	15
Chain width mm	82.8, 158.8
Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Extended plate edges facilitate smoother right-angle transfers. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT1505TOD-M


Pitch mm	15
Chain width mm	160
Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Extended taper on one side of the base chain enables smooth right-angle transfers. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT1515G-M


Pitch mm	15
Chain width mm	50
Small chain pitch of 15mm is ideal for conveying small, lightweight containers. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

BTC8H-M


Pitch mm	25.4
Chain width mm	82.6
Ideal for conveying trays using multiple chain strands running side-by-side. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

BTM8H-M


Pitch mm	25.4
Chain width mm	82.6
Ideal for conveying trays using multiple chain strands running side-by-side. Magnets embedded in the links enable inclined conveyance of metal trays. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2505-M


Pitch mm	25.4
Chain width mm	82.6, 114.3
Chain pitch of 25.4mm is ideal for conveying medium-sized containers. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2505G-M


Pitch mm	25.4
Chain width mm	82.6, 114.3
Chain pitch of 25.4mm is ideal for conveying medium-sized containers. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2505TOD-M


Pitch mm	25.4
Chain width mm	160, 236.2
Chain pitch of 25.4mm is ideal for conveying medium-sized containers. Extended taper on one side of the base chain enables smooth right-angle transfers. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

BTO8-M


Pitch mm	25.4
Chain width mm	83
Stable conveyance of small items and smooth transitions between conveyors are possible. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surfaces. All-plastic construction means light weight and easy handling. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT3005G-M


Pitch mm	30
Chain width mm	75.8, 113.8
Chain pitch is 30mm; chain can be driven using the same shafts as the WT1500 series. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT3086G-M


Pitch mm	30
Chain width mm	84.5
Chain pitch is 30mm; chain can be driven using the same shafts as the WT1500 series. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT3835G-M


Pitch mm	38.1
Chain width mm	82.6
Chain pitch of 38.1mm is ideal for conveying medium-sized containers. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors. All-plastic construction. Lightweight and easy to handle. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3835-T


Pitch mm	38.1
Chain width mm	152.4 ～ 1524
Mass handling is possible due to the wide carry-way, which is a combination of a wide module with a narrow module in a brick-layered array. WT3835 with float-preventive tabs, which prevents chains from floating, is suitable for vertical vacuum conveyors . Lightweight and easy-handling due to all plastic-made chain. Easy to connect and disconnect the chain with a screwdriver due to the adoption of the slide plug for retaining pin. Product Info Applications

(Drag to move. )

Plastic top chain

TTP


Pitch mm	38.1
Chain width mm	63.5, 76.2, 82.6, 101.6, 114.3, 127, 152.4, 165.1, 190.5
Plate thickness mm	4.0
Worldwide standard shape. Wide range of plate widths available. Can accommodate a wide range of conveyed object sizes. Product Info Applications

(Drag to move. )

Plastic top chain

TTP-P


Pitch mm	38.1
Chain width mm	63.5, 76.2, 82.6, 101.6, 114.3, 127, 152.4, 165.1, 190.5
Plate thickness mm	4.0
Worldwide standard shape. Wide range of plate widths available. Can accommodate a wide range of conveyed object sizes. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TTPH


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Comb-toothed plates minimize gaps between links. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling duringconveyance. Both ends of the plates are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains. Same basic dimensions as TTP826 plastic top chain. Can provide stable container conveyance simply by replacing the chain. Product Info Applications

(Drag to move. )

Plastic top chain

TTPH-P


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Comb-toothed plates minimize gaps between links. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling duringconveyance. Both ends of the plates are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains. Same basic dimensions as TTP826 plastic top chain. Can provide stable container conveyance simply by replacing the chain. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TTPT


Pitch mm	38.1
Chain width mm	82.6, 114.3, 190.5
Plate thickness mm	4.8
Plates are thicker than TTP chain. Ideal for applications where the plates would be susceptible to wear. Product Info Applications

(Drag to move. )

Plastic top chain

TTPDH


Pitch mm	38.1
Chain width mm	190.5, 254, 304.8
Plate thickness mm	4.8
Higher maximum allowable load than TTP chain (approx. double). Ideal for higher applied load conditions. Plates are wider, and thus can be used to convey larger objects. Product Info Applications

(Drag to move. )

Plastic top chain

TTPM


Pitch mm	19.05
Chain width mm	50
Plate thickness mm	3.2
Chain pitch is approximately one-half of conventional conveyor chains, effectively lowering conveyor noiselevel and reducing the gap between the end of one conveyor and the start of the next conveyor. With a plate width of 50mm, this plastic top chain is ideal for conveying small objects. Product Info Applications

(Drag to move. )

Plastic top chain

TPF


Pitch mm	38.1
Chain width mm	76.2, 82.6
Plate thickness mm	3.2
Approx. 40% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions. 3.2mm plate thickness, the same plate thickness as TT stainless steel top chain. Product Info Applications

(Drag to move. )

Plastic top chain

TP-OTD


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Approx. 30% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions. Uses the same 4.0mm plate thickness as TTP and TTUP types, making it easy to adjust the level of wearstrips of lines running in parallel. Product Info Applications

(Drag to move. )

Plastic top chain

TPS


Pitch mm	38.1
Chain width mm	76.2, 82.6, 101.6, 114.3, 127
Plate thickness mm	4.0
Approx. 40% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions. Uses the same sprockets as TTUP and TPU sideflexing plastic top chains. Designed to allow common sprockets to be used. Product Info Applications

(Drag to move. )

Plastic top chain

TPS-P


Pitch mm	38.1
Chain width mm	82.6, 114.3
Plate thickness mm	4.0
Higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions. Uses the same sprockets as TTUP and TPU sideflexing plastic top chains. Designed to allow common sprockets to be used. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TPH


Pitch mm	38.1
Chain width mm	83
Plate thickness mm	4.0
Comb-toothed plates minimize gaps between links. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surface. Same basic dimensions as TPS plastic top chain. Can provide stable container conveyance simply by replacing the chain. Product Info Applications

(Drag to move. )

Plastic top chain

TPH-P


Pitch mm	38.1
Chain width mm	83
Plate thickness mm	4.0
Comb-toothed plates minimize gaps between links. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surface. Same basic dimensions as TPS plastic top chain. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TPSS


Pitch mm	38.1
Chain width mm	114.3, 127, 152.4, 190.5
Plate thickness mm	4.8
Chain is 2.3 times stronger than TTP chains. Suitable for higher load applications. Can handle larger and heavier products. Product Info Applications

(Drag to move. )

Plastic top chain

TPM


Pitch mm	19.265
Chain width mm	82.6
Plate thickness mm	4.0
Chain pitch is approximately one-half that of conventional conveyor chains, effectively reducing conveyor noise levels and reducing the gap between the end of one conveyor and the start of the next conveyor. Type TPS sprockets (odd number of teeth) can be used. Designed to allow common sprockets to be used. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TPM-SN


Pitch mm	19.05
Chain width mm	82.6
Plate thickness mm	4.0
Applies the concept of silent chain engagement. Extremely effective in reducing conveyor noise. Uses special sprockets. Suppresses chordal action of the chain when engaging with the sprocket, enabling stable chain travel. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TPM-P-SN


Pitch mm	19.05
Chain width mm	82.6
Plate thickness mm	4.0
Applies the concept of silent chain engagement. Extremely effective in reducing conveyor noise. Uses special sprockets. Suppresses chordal action of the chain when engaging with the sprocket, enabling stable chain travel. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TPRF2040


Pitch mm	25.4
Chain width mm	50
Plate thickness mm	3.0
With a plate width of 50mm and a 25.4mm pitch, this plastic top chain is ideal for conveying small objects. RF2040S sprockets can be used (19 teeth or more). Product Info Applications

(Drag to move. )

Plastic top chain

TPRF2060


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	3.2
Double-pitch top chain featuring wider plastic top plates for better product support. RF2060S sprockets can be used (19 teeth or more). Product Info Applications

(Drag to move. )

Plastic top chain

TTUP


Pitch mm	38.1
Chain width mm	82.6, 114.3, 190.5
Plate thickness mm	4.0
Most popular chain series designed for use in sideflexing conveyors. Simple construction facilitates washing and clean-up. Uses the same sprockets as TPS and TTU plastic top chains. Designed to allow common sprockets to be used. Product Info Applications

(Drag to move. )

Plastic top chain

TTUP-P


Pitch mm	38.1
Chain width mm	82.6, 114.3
Plate thickness mm	4.0
Most popular chain series designed for use in sideflexing conveyors. Simple construction facilitates washing and clean-up. Uses the same sprockets as TPS and TTU plastic top chains. Designed to allow common sprockets to be used. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TTUP-M


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Combining a magnetic wearstrip prevents the chain from floating in curved sections. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPT-M


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.8
Combining a magnetic wearstrip prevents the chain from floating in curved sections. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPH


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Comb-toothed plates minimize gaps between links. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance. Same basic dimensions as TTUP plastic top chain. Can provide stable container conveyance simply by replacing the chain. Both ends of the plate are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPS


Pitch mm	38.1
Chain width mm	114.3, 127, 152.4, 190.5
Plate thickness mm	4.8
Chain is 1.8 times stronger than TTUP chains. Suitable for higher load applications. Can handle larger and heavier products. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPS-H


Pitch mm	25.4
Chain width mm	84
Plate thickness mm	9.8
Features 9.8mm thick top plates that are harder to crack than conventional plastic top chain plates. Uses a D-pin for the connecting pin to prevent cracks from forming from the interference fit area between pin hole and pin. The chain can also be connected or disconnected from either side when it is time for maintenance. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPM-P


Pitch mm	12.7
Chain width mm	50
Plate thickness mm	2.8
Small chain pitch of 12.7mm is effective in lowering conveyor noise level and reducing the gap between the end of one conveyor and the start of the next conveyor. With a plate width of 50mm, this plastic top chain is ideal for conveying small objects. Product Info Applications

(Drag to move. )

Plastic top chain

TPU


Pitch mm	38.1
Chain width mm	82.6, 114.3
Plate thickness mm	4.0
Equipped with fl oat-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used. Product Info Applications

(Drag to move. )

Plastic top chain

TPU-P


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Equipped with fl oat-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic top chain

TPU-LH


Pitch mm	38.1
Chain width mm	114.3
Plate thickness mm	4.0
Link height is lower than TPU chain, enabling more compact conveyor layouts. Product Info Applications

(Drag to move. )

Plastic top chain

TPUT-LH


Pitch mm	38.1
Chain width mm	82.6, 114.3
Plate thickness mm	4.8
Link height is lower than TPU chain, enabling more compact conveyor layouts. Plate thickness (4.8mm) is thicker than TPU chain. Ideal for applications where the plates would be susceptible to wear. Product Info Applications

(Drag to move. )

Plastic top chain

TPUS


Pitch mm	38.1
Chain width mm	114.3, 190.5, 254, 304.8
Plate thickness mm	4.8
Approx. 2.2 times higher maximum allowable load than TPU chain. Ideal for higher load applications. Plates are wider, and thus can be used to convey larger objects. Product Info Applications

(Drag to move. )

Plastic top chain

TPUM


Pitch mm	19.265
Chain width mm	82.6
Plate thickness mm	4.0
Chain pitch is approximately one-half that of conventional conveyor chains, effectively reducing conveyor noise levels and reducing the gap between the end of one conveyor and the start of the next conveyor. Type TPS sprockets (odd number of teeth) can be used. Designed to allow common sprockets to be used. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TPUH-BO


Pitch mm	38.1
Chain width mm	82.6, 114.3
Plate thickness mm	4.8
Has a smaller minimum sideflex radius than TTUP or TPU series (R=190mm), allowing for compact layouts. Comb-toothed plates minimize gaps between links. Product Info Applications

(Drag to move. )

Plastic top chain

TPU-USR


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.0
Has a smaller minimum sideflex radius than TTUP or TPU series (R=190mm), allowing for compact layouts. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TTUP-LLPC


Pitch mm	38.1
Chain width mm	82.6
Plate thickness mm	4.8
Prevents floating thanks to its low center of gravity and relatively small sideflex radius. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used. Product Info Applications

(Drag to move. )

Plastic top chain

TPUSR550


Pitch mm	31.75
Chain width mm	55
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TPUSR826


Pitch mm	31.75
Chain width mm	82.6
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TP-UB36


Pitch mm	36
Chain width mm	55
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Comb-toothed plates minimize gaps between links. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises. Product Info Applications

(Drag to move. )

Plastic top chain

TPUN


Pitch mm	50
Chain width mm	51.5
Plate thickness mm	---
Small sideflex radius (140mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Approx. 1.8 times higher maximum allowable load than TTUP chain. Ideal for higher load applications. Uses D-pins that protrude from one side only, preventing poor articulation. Pivot misassembly prevention system prevents faulty engagement of the chain and sprocket by eliminating mistakes in the direction of pivot insertion. Product Info Applications

(Drag to move. )

Plastic top chain

TPUN550-LH


Pitch mm	50
Chain width mm	55
Plate thickness mm	---
Small sideflex radius (150mm) enables more compact conveyor layouts. This series features a link height often seen in overseas markets. Link height is slightly lower than TPUN chain. Product Info Applications

(Drag to move. )

Plastic top chain

TPUN535-LH


Pitch mm	50
Chain width mm	53.5
Plate thickness mm	---
Small sideflex radius (150mm) enables more compact conveyor layouts. This series features a link height often seen in overseas markets. Link height is slightly lower than TPUN chain. Product Info Applications

(Drag to move. )

Plastic top chain

TP-50UNS


Pitch mm	50
Chain width mm	51
Plate thickness mm	---
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Chain has a higher strength, which makes it suitable for high load applications. Product Info Applications

(Drag to move. )

Plastic top chain

TP-50UNS-D76


Pitch mm	50
Chain width mm	51
Plate thickness mm	---
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Chain has a higher strength, which makes it suitable for high load applications. Constructed with pushers to move products up or down inclines. Product Info Applications

(Drag to move. )

Plastic top chain

TP-50UN-T95


Pitch mm	50
Chain width mm	95
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Constructed with crescent-shaped top plates to minimize the gap in straight and curved sections for better product handling. Product Info Applications

(Drag to move. )

Plastic top chain

TPCC420


Pitch mm	90
Chain width mm	42
Plate thickness mm	---
Simple plastic chain with offset link design. For conveying crates, boxes, and the like. Product Info Applications

(Drag to move. )

Plastic top chain

TPCC420-T


Pitch mm	90
Chain width mm	42
Plate thickness mm	---
Simple plastic chain with offset link design. For conveying crates, boxes, and the like. Product Info Applications

(Drag to move. )

Plastic top chain

TORP・TOSP


Pitch mm	76.2
Chain width mm	114.3
Plate thickness mm	4.0
For horizontal circular conveyance. Designed so the entire surface can be used to convey objects. No return-way chain, so the height of the conveyer can be reduced. Crescent-shaped top plates. Space between links remains constant in curved sections, minimizing conveyed objects becoming pinched or caught in the gap. Product Info Applications

(Drag to move. )

Plastic top chain

TOSP


Pitch mm	76.2
Chain width mm	114.3
Plate thickness mm	4.0
For horizontal circular conveyance. Designed so the entire surface can be used to convey objects. No return-way chain, so the height of the conveyer can be reduced. Crescent-shaped top plates. Space between links remains constant in curved sections, minimizing conveyed objects becoming pinched or caught in the gap. Product Info Applications

(Drag to move. )

Plastic top chain

TP-36AK


Pitch mm	36
Chain width mm	60
Plate thickness mm	5.5, 6.5
Chain is uniquely designed to keep the gaps at a minimum in straight and curved sections for better product handling. High-friction top plates can be assembled with standard link materials, making this chain suitable for incline or decline conveyors. Product Info Applications

(Drag to move. )

Plastic top chain

TN


Pitch mm	19.05
Chain width mm	82.6
Plate thickness mm	4.0
Suitable for heavy loads and long conveyor applications because of high allowable chain load(except for SS and PC types). Replacing top plates is simple and easy. Product Info Applications

(Drag to move. )

Plastic top chain

TNU


Pitch mm	19.05
Chain width mm	82.6, 114.3, 127
Plate thickness mm	4.0
Curved conveyance chain with high allowable load (double the allowable load of TTUP chain). Replacing top plates is simple and easy. Product Info Applications

(Drag to move. )

Plastic top chain

TP-PT


Pitch mm	19.05
Chain width mm	82.6, 114.3
Plate thickness mm	4.0
Curved conveyance chain for heavier loads (high allowable chain load). Comb-toothed plates minimize gaps between links. Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired. Product Info Applications

(Drag to move. )

Plastic top chain

TP-PTS


Pitch mm	19.05
Chain width mm	254
Plate thickness mm	6.0
Curved conveyance chain for heavier loads (high allowable chain load). Comb-toothed plates minimize gaps between links. Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired. Product Info Applications

(Drag to move. )

Plastic top chain

TP-1873-T


Pitch mm	19.05
Chain width mm	82.6
Plate thickness mm	4.0
Curved conveyance chain for heavier loads (high allowable chain load). Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired. Product Info Applications

(Drag to move. )

Plastic top chain

TP-1843-G


Pitch mm	12.7
Chain width mm	31
Gripper chain is used to hold products from both sides to convey them vertically. Material and shape can be chosen. Top plate and grip rubber: Replacable. Product Info Applications

(Drag to move. )

Plastic top chain

TP-1873-G


Pitch mm	19.05
Chain width mm	86
Gripper chain is used to hold products from both sides to convey them vertically. Material and shape can be chosen. Top plate and grip rubber: Replacable. Product Info Applications

(Drag to move. )

Plastic top chain

TTPDH-LBP


Pitch mm	38.1
Chain width mm	190.5, 254.0, 304.8
Free rotation of plastic accumulation rollers protects conveyed objects from damage. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications. Coefficient of rolling friction for free-flow rollers is 0.10. Product Info Applications

(Drag to move. )

Plastic top chain

TPUS-LBP


Pitch mm	38.1
Chain width mm	95.3, 190.5
Free rotation of plastic accumulation rollers protects conveyed objects from damage. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications. Coefficient of rolling friction for free-flow rollers is 0.10. Product Info Applications

(Drag to move. )

Plastic top chain

TP-30UTW-LAP


Pitch mm	30
Chain width mm	80
Free rotation of plastic accumulation rollers protects conveyed objects from damage. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications. Coefficient of rolling friction for free-flow rollers is 0.07. Product Info Applications

(Drag to move. )

Plastic top chain

TP-36UTW-LAP


Pitch mm	36
Chain width mm	120
Free rotation of plastic accumulation rollers protects conveyed objects from damage. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications. Coefficient of rolling friction for free-flow rollers is 0.07. Product Info Applications

(Drag to move. )

Plastic block chain

RSP


Pitch mm	9.525, 12.7, 15.875, 19.05
Chain width mm	13, 20, 22.5, 30
Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor. Diverse range of chain pitches and link widths available. Suitable for a wide range of applications. Standard ANSI sprockets can be used. Block shape and small link width ideal for conveying small goods. Multiple strands can be used in parallel; ideal for conveying pallets. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-P


Pitch mm	12.7, 19.05
Chain width mm	20, 30
Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor. Diverse range of chain pitches and link widths available. Suitable for a wide range of applications. Standard ANSI sprockets can be used. Block shape and small link width ideal for conveying small goods. Multiple strands can be used in parallel; ideal for conveying pallets. All-plastic construction means light weight and easy handling. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-SL


Pitch mm	12.7
Chain width mm	30
Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor. Plastic Block Chain with top plates; ideal for conveying small goods. Suitable for suspended conveyance of goods between paralleled strands of chains. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-PO8PF


Pitch mm	12.7
Chain width mm	21.5
Small pitch and small link width ideal for conveying small goods. Chain is designed to convey fl anged products supported between two strands of chains. Standard ANSI sprockets can be used. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-PO8PFT


Pitch mm	12.7
Chain width mm	21.5
Small pitch and small link width ideal for conveying small goods. Chain is designed to convey fl anged products supported between two strands of chains. Protrusions on the surface enable centering of fl anged products. Standard ANSI sprockets can be used. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-2


Pitch mm	19.05
Chain width mm	60
Link width is double that of RSP60 chain. Suitable for conveying wider goods. Approx. 40% higher maximum allowable load than RSP60 plastic chain. Ideal for higher applied load conditions. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-CU


Pitch mm	19.05
Chain width mm	30
RSP60-CU chain designed for use in sidefl exing conveyors. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-P-CU


Pitch mm	19.05
Chain width mm	30
RSP60-CU chain designed for use in sidefl exing conveyors. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins. Product Info Applications

(Drag to move. )

Plastic block chain

RSP-CU-2


Pitch mm	19.05
Chain width mm	63
Chain designed for use in sidefl exing conveyors. Suitable for conveying wider goods. Approx. 30% higher maximum allowable load than RSP60CU chain. Ideal for higher applied load conditions. Equipped with fl oat-preventive tabs. Keeps the chain securely in position. Product Info Applications

(Drag to move. )

Snap cover chain

RF-SC, RS-SC


Pitch mm	9.525, 12.7, 15.875, 19.05, 25.4, 31.75
Chain width mm	17.5, 23.5, 29.0, 35.0, 42.5, 49.5
Higher maximum allowable load than Plastic Block chain (type RS60-SC approx. seven times higher than RSP60 chain). Ideal for long, heavy-load conveyors. Plastic covers provide safety for both conveyed goods and people. Six different chain pitches available, suitable for a diverse range of applications. Product Info Applications

(Drag to move. )

Plastic top chain

TPUS953Y-T-LAP


Pitch mm	38.1
Chain width mm	95.3
Roller rotation reduces line pressure. Suitable for conveyor lines on which conveyed objects will accumulate. Enlarging the roller diameter from the Φ9.5 of conventional products (TPUS953-T-LBP) to Φ11 reduces the gap between rollers and links, which reduces the frequency of conveyed items getting caught. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2515G-M


Pitch mm	25.4
Chain width mm	83.8
Chain pitch of 25.4mm is ideal for conveying beverage containers. Uses special stepped plastic connecting pins and a plug-less structure that prevents plugs (parts that prevent pin drop-out) from dropping out. Entire chain is made of lightweight, easy to handle plastic. Product Info Applications

(Drag to move. )

Plastic top chain

TTUPM838H


Pitch mm	25.4
Chain width mm	83.8
Plate thickness mm	8.7
TTUPM-H Type uses the world’s first special double layer D-type plastic pin combining both plastic and metal. Ideal for preventing chain floating on curved sections when used in combination with magnet-embedded rails. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3109-W


Pitch mm	31.75
Chain width mm	300 ～ 1200
WT3109-W Series can now be used on low-floor man conveyors (conveyor height=250mm) thanks to its smaller chain pitch. A special relief pattern embossed on the top surface of the chain provides an anti-slip effect. Its design acts to minimize slippage and works to prevent objects from becoming snagged on the chain surface. Slide lock pin retention system allows easy installation and maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1515-W


Pitch mm	15
Chain width mm	50 ～ 500
Users can select chain width in 50mm units (standard configurations). Perfect for conveying beverage containers as well as mechanical parts. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use. Product Info

(Drag to move. )

Plastic modular chain (wide type)

WT1515G-W


Pitch mm	15
Chain width mm	100 ～ 500
Users can select chain width in 50mm units (standard configurations). Perfect for conveying beverage containers as well as mechanical parts. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use. There is no need to worry about belt meandering thanks to the integrated tab guide attachments. Product Info

(Drag to move. )

Plastic modular chain (wide type)

WT2515-W


Pitch mm	15
Chain width mm	85 ～ 1700
The chain consists of a combination of 85mm and 170mm wide modular links. Uses a plug to prevent pin drop out.Makes chain maintenance (cutting/connecting) easy. Product Info

(Drag to move. )

Plastic modular chain (wide type)

WT2515G-W


Pitch mm	15
Chain width mm	85 ～ 1700
The chain consists of a combination of 85mm and 170mm wide modular links. Uses a plug to prevent pin drop out.Makes chain maintenance (cutting/connecting) easy. There is no need to worry about meandering thanks to the tab guide attachments. Product Info

(Drag to move. )

Plastic top chain

TPUSR550P


Pitch mm	31.75
Chain width mm	55
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic top chain

TPUSR826P


Pitch mm	31.75
Chain width mm	82.6
Plate thickness mm	4.0
Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT0405-W


Pitch mm	4.5
Chain width mm	90 ～ 945
The minimum chain pitch of 4.5mm in Tsubaki's Top Chain line-up enables a simple conveyor design. It can be used as a transfer unit between conveyors thanks to minimized dead space. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1516-W


Pitch mm	15
Chain width mm	50 ～ 500
Users can select chain width in 50mm units (standard configurations). Myriad holes on the surface of the chain eliminate any excess lubrication as well as water/oil that remain on the surface. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2515F-W


Pitch mm	15
Chain width mm	170 ～ 850
Boxes, cases, and bulk items can be conveyed at an incline. Product Info Applications

(Drag to move. )

Plastic block chain

RSP40-T-CU


Pitch mm	12.7
Chain width mm	20
Straight and curved conveyance is possible, making layout easy. Chain pitch is 12.7mm, and the minimum bending radius is R300, allowing for space savings. With attachments to prevent floating. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2525-K


Pitch mm	25.4
Chain width mm	76.2 ～ 1524
Suitable to convey stacked cardboards. The chain's top surface has a slightly convex shape where stacked heavy sheets slightly slip into, thereby preventing the sheets from slipping. The backside surface has a rounded shape, which is suitable to wind around the round bar of 50 mm and minimize dead space between the conveyors. The new plug reduces the force when inserting plug by 60% compared to the previous plug, making it easier to connect and disconnect the chain. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1515F-W


Pitch mm	15
Chain width mm	50 ～ 750
The lineup of flight heights 10mm and 50mm allows selection of flight heights that match the transport conditions The lineup of indents 0mm and 25mm allows selection of an indent width that matches the conveyance conditions Prevents chain from floating by adopting float-preventive tab. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1516F-W


Pitch mm	15
Chain width mm	50 ～ 750
The lineup of flight heights 10mm and 50mm allows selection of flight heights that match the transport conditions The lineup of indents 0mm and 25mm allows selection of an indent width that matches the conveyance conditions Prevents chain from floating by adopting float-preventive tab. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1515VG-W


Pitch mm	15
Chain width mm	50 ～ 1000
A herringbone-shaped rubber, which was attached to the surface of the chain by double injection molding, prevents conveyed product from slipping off and enables vertical transportation up to 20 degrees inclination. WT1515VG-W (rubber type) can be transferred conveyed product smoothly to next process, owing to configure in-line layout without using transfer plate between conveyors. Nose bars make it possible to reduce dead space between conveyors. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT0705-W


Pitch mm	7.5
Chain width mm	50 ～ 500
Made of standard materials, with a minimum chain pitch of 7.5mm. Enables a 19mm dead space between conveyors by using a minimum R3 nose bars. Ideal for stable conveyance of items that easily deform and small items. Uses a slit pin integrated with the plug for chains with 50mm and 100mm widths. Reduces noise by 6.5dB on average compared to chains with a 15mm pitch. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT0705-M


Pitch mm	7.5
Chain width mm	30
The first introduced 30mm-width Plastic Modular Chain. Suitable for compact layout and the replacement from narrow belt. The nose bar with 3mm radius reduces the dead space between conveyors to 19mm, making it suitable to convey small products. Slit pin system improves maintainability Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WTM2535G-M


Pitch mm	25.4
Chain width mm	82.6
Low magnetic force reduces the impact on the conveyed products when they leave the chain, which minimizes damage to the products and the chain. Low magnetic type contributes to smooth traverse of products. WTM2535G-M adopts slide plugs for preventing pins from falling off on both sides of the chains. Pins can be inserted or removed from both sides.This feature contributes to easy maintenance. WTM2535G-M adopts cylindrical shape of magnet to prevent magnet from flying out when chain wears. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WTU3015T-K


Pitch mm	30
Chain width mm	228.6 ～ 762.0
Plastic modular chan that allows a variety of curved layout including 90-degree, 180-degree and S-shape. Adopts a plug which is easy to handle to prevent pins to come out.Easier to maintain compared to wire mesh conveyor and rubber belt conveyor. Tabs which prevent chains from floating made of Advanced Low Friction/Wear Resistant Series(ALF) reduce the coefficient of dynamic friction with rails. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WTU3015T-K-SUSP


Pitch mm	30
Chain width mm	228.6 ～ 762.0
Plastic modular chan that allows a variety of curved layout including 90-degree, 180-degree and S-shape. Adopts a plug which is easy to handle to prevent pins to come out.Easier to maintain compared to wire mesh conveyor and rubber belt conveyor. Tabs which prevent chains from floating made of Advanced Low Friction/Wear Resistant Series(ALF) reduce the coefficient of dynamic friction with rails. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT2525VG-K


Pitch mm	25.4
Chain width mm	76.2 ～ 1143.0
Suitable for vertical transportation due to high friction of the rubber which was attached to the surface by double injection molding. Possible to shorten dead space between conveyors due to using small rollers of diameter of 50 mm for both ends of the conveyors. By supporting chain using return rollers or wearstrips at indent section in return way, it is possible to prevent rubber from wearing. Possible to maintain only with flathead screwdriver due to adopting Pin and Plug system. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2525-M


Pitch mm	25.4
Chain width mm	100
The chain's top surface has a slightly convex shape where stacked heavy sheets slightly slip into, thereby preventing the sheets from slipping. 100 mm chain width makes them ideal for replacing from belt conveyors. By installing a Φ50 round bar at conveyor ends, transfer space between conveyors can be reduced. Can be configured in combination with WT2525VG-M type Possible to maintain only with flathead screwdriver due to adopting Pin and Plug system. Product Info Applications

(Drag to move. )

Plastic modular chain (Mold-to-Width type)

WT2525VG-M


Pitch mm	25.4
Chain width mm	100
Ideal for inclined conveyance of boxes, etc. by integral molding (double injection molding) with rubber on conveyance surface of chain 100 mm chain width makes them ideal for replacing from belt conveyors. By installing a Φ50 round bar at conveyor ends, transfer space between conveyors can be reduced. Can be configured in combination with WT2525-M type Possible to maintain only with flathead screwdriver due to adopting Pin and Plug system. Product Info Applications

(Drag to move. )

Plastic top chain

TPUMF1200-T


Pitch mm	19.05
Chain width mm	120
Plate thickness mm	3.5
Sideflexing running chain with a flat conveying surface The chain pitch is 19.05mm, which is 1/2 of the conventional TPU chain pitch. The dead space is small due to the in-line layout, enabling smooth transfers. Prevents the chain from floating and scratches on the conveying surface with float-preventive attachments (tabs). D-pin is used for connecting pin to prevent pin hole cracks Product Info Applications

(Drag to move. )

Plastic top chain

TPUMF1200-TB


Pitch mm	19.05
Chain width mm	120
Plate thickness mm	3.5
Three convex shapes of the conveying surface suppress the conveyed material from sliding down The chain pitch is 19.05mm, which is 1/2 of the conventional TPU chain pitch. The dead space is small due to the in-line layout, enabling smooth transfers. Prevents the chain from floating and scratches on the conveying surface with float-preventive attachments (tabs). D-pin is used for connecting pin to prevent pin hole cracks Product Info Applications

(Drag to move. )

Plastic top chain

TPUMF1200F-T


Pitch mm	19.05
Chain width mm	120
Plate thickness mm	3.5
In combination with TPUMF-T and TPUMF-TB types, inclined conveyance with flight links is possible. The chain pitch is 19.05mm, which is 1/2 of the conventional TPU chain pitch. The dead space is small due to the in-line layout, enabling smooth transfers. Prevents the chain from floating and scratches on the conveying surface with float-preventive attachments (tabs). D-pin is used for connecting pin to prevent pin hole cracks Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1505RN-K


Pitch mm	15
Chain width mm	76.2 ～ 3733.8
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying cans with the cut edge down to prevent cans from toppling over in the can manufacturing industry, or for inclined/vertical conveying by vacuum or magnet to prevent cans from slipping down. Ideal for conveying small and lightweight containers Combined with TOD-type chain, dead plates can be omitted, enabling transfer with less remaining product. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1505GTORN-K


Pitch mm	15
Chain width mm	76.2 ～ 3740.8
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying cans with the cut edge down to prevent cans from toppling over in the can manufacturing industry, or for inclined/vertical conveying by vacuum or magnet to prevent cans from slipping down. Ideal for conveying small and lightweight containers Ideal for right-angle conveyance due to the extended plate on the chain Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1515T-F-W


Pitch mm	15
Chain width mm	100 ～ 2300
WT1515F-W type with float-preventive attachment (tabs) to prevent the chain from floating from the frame Boxes, cases, and bulk items can be conveyed at an incline. Compatible with 100 mm wide chains similar to flat belt conveyors, enabling replacement of flat belt conveyors. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT1516T-F-W


Pitch mm	15
Chain width mm	100 ～ 2300
WT1516F-W type with float-preventive attachment (tabs) to prevent the chain from floating from the frame Chain width can be selected in 50mm increments (standard configuration) Boxes, cases, and bulk items can be conveyed at an incline. Numerous holes are placed on the conveying surface to remove excess lubricant and water remaining on the top surface. Compatible with 100 mm wide chains similar to flat belt conveyors, enabling replacement of flat belt conveyors. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC6RN


Pitch mm	19.05
Chain width mm	76.2 ～ 2514.6
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying cans with the cut edge down to prevent cans from toppling over in the can manufacturing industry, or for inclined/vertical conveying by vacuum or magnet to prevent cans from slipping down. Ideal for conveying small and lightweight containers Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTC6RN-T


Pitch mm	19.05
Chain width mm	76.2 ～ 2514.6
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying cans with the cut edge down to prevent cans from toppling over in the can manufacturing industry, or for inclined/vertical conveying by vacuum or magnet to prevent cans from slipping down. BTC6RN type with float-preventive attachment (tabs) to prevent the chain from floating from the frame Prevents scratches on top surface of plate by hanging the float-preventive attachment (tabs) on the return side Ideal for conveying small and lightweight containers Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3835RN-K


Pitch mm	38.1
Chain width mm	152.4 ～ 1524
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying beverage containers Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT3835TRN-K


Pitch mm	38.1
Chain width mm	152.4 ～ 1524
Mirror surface finish without texture (RN specification) is used for the module surface finish WT3835RN-K with float-preventive tabs, which prevents chains from floating, is suitable for vertical vacuum conveyors . Ideal for conveying beverage containers Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

BTO6RN


Pitch mm	19.05
Chain width mm	76.2 ～ 2514.6
Mirror surface finish without texture (RN specification) is used for the module surface finish Ideal for conveying cans with the cut edge down to prevent cans from toppling over in the can manufacturing industry, or for inclined/vertical conveying by vacuum or magnet to prevent cans from slipping down. Ideal for conveying small and lightweight containers Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface. Product Info Applications

(Drag to move. )

Plastic modular chain (wide type)

WT6306-W


Pitch mm	63.5
Chain width mm	400 ～
The highest allowable load (103kN/m) and high rigidity in the history of Tsubaki plastic modular chains Long-length conveyors exceeding 100 m in length are supported Ideal for conveying large quantities and heavy loads such as vehicles and trolleys Special uneven shape on the chain upper surface provides a non-slip effect. The shape prevents slipping and catching when working on the chain upper surface, making it suitable for human conveyors. Drain holes on the top surface of the plate prevent water from accumulating, allowing use in shower testers, etc. Product Info Applications

(Drag to move. )

Standard Series 　[ Package symbol :None , G, W, B, BL, A ]

General-purpose polyacetal chain links

Color : Gray

Color : White

Appearance 色: Blue

Color : Sky blue

■ General use type: Suitable for general purpose due to general-grade polyacetal with excellent mechanical properties
■ Antistatic: Features electrostatic properties to prevent wear and adhesion of dust
(Color: Gray, Blue, Green, Sky Blue )　Note) 2

Note) 1. There are Standard series with specification marks Refer to the product information for details
Note) 2. Refer to each product's page for color and/or with or without electrostatic preventive function
Note) 3. Some products such as Plastic Roller Table and plastic universal chains do not use the description "Standard Series"

(Drag to move. )

Low-friction/ Wear-resistant 　[ Package symbol : LF ]

Low-friction and wear-resistant polyacetal link

Color : White [LFW]

Color : Green [LFG]

Appearance 色: Brown [LFB]

■ Application

Can be used in a wide range of applications
Suitable for harsh conditions (high speed, high load) where chain elongation is accelerated resulting in short chain replacement cycle
To prevent products from scratching caused by high pressure during accumulation

■ To protect products conveyed: Reduces line pressure and scratches to the products during accumulation due to its coefficient of friction 14% to 45% lower than compared to Standard series
■ Longevity (Compared to Standard Series ): Improves lifespan from 1.2 times to 2 compared to Standard series due to lower coefficient friction
■ Smooth merge/divert
■ To reduce motor power
■ Chain elongation of Standard, LF and ALF series.

(Drag to move. )

Low-friction/ Wear-resistant 　[ Package symbol : CB ]

Low-friction and wear-resistant polyacetal link

Color : Blue [CB]

■ Application

To prevent products from scratching caused by high pressure during accumulation

Note) Do not use in printing process due to the material containing silicone-compounded lubricant

■ To protect products conveyed

Reduces line pressure and scratches to the products during accumulation due to its lower coefficient of friction compared to Standard series

■ Smooth merge/divert

■ To reduce motor power

■ Applicable chains are followings.

WT2515G-M, WT2515-W, WT2515G-W, WT2515F-W and TTUPM828H

(Drag to move. )

Advanced low friction/wear resistant series 　[ Package symbol : ALF ]

Adopts advanced low friction/wear resistant polyacetal

Color : Light blue [ALF]

■ Application

Before the packaging process where lubricants cannot be used and wear debris generation matters
Dry running process in beverage industry
Accumulation conveyor
For high speed running processes such as beverage industry, inspecting, laser marking and single filer

Note) 1. Do not use in printing process due to the material containing silicone-compounded lubricant
Note) 2. ULF series had discontinued since October 2018.

■ To protect products conveyed

Suitable for dry running using Tsubaki original plastic material compounded silicone-based lubrication Reduces the volume of wear debris significantly in dry running, while having same coefficient friction as same as ULF series

■ Smooth merge/divert

■ To reduce motor power

■ Comparison of wear against ULF series

※The upper graph is result of in-house test The wear volume of LF series is represented as 100
※ALF generates less wear debris compared to ULF Recommend using PLF rails to generate less wear debris

(Drag to move. )

Low Friction Specifications 　[ Package symbol : NLF ]

Adopts low friction polyacetal

Color : Dark gray [NLF]

■ Application

Can be used in a wide range of applications
To prevent products from scratching caused by high pressure during accumulation

■ To protect products conveyed: Reduces line pressure and scratches to the products during accumulation due to its coefficient of friction 10% to 30% lower than compared to Standard series
■ Smooth merge/divert
■ To reduce motor power

※The maximum allowable tension is as same as Standard series

(Drag to move. )

Low Friction Specifications 　[ Package symbol : WR ]

Adopts corrosion resistant polyacetal for chain link

Color : Dark green [WR]

■ Application

In case of using chemical solvents such as sodium hypochlorite
To prevent products from scratching caused by high pressure during accumulation

■ To protect products conveyed: Reduces line pressure during accumulation due to its coefficient of friction 7% to 28% lower than compared to Standard series Minimize scratching to conveyed products
■ Corrosion resistance: Suitable for transporting foods and beverages due to corrosion resistance against sodium hypochlorite
■ Smooth merge/divert
■ To reduce motor power

The maximum allowable tension is as same as Standard series

(Drag to move. )

Heat resistant/High speed series 　[ Package symbol : KV ]

Adopts special engineering plastic for chain link

Color : Black [KV150・KV180・KV250]

■ Application

Transportation of laminated solar panels
Transportation of printed circuit boards after furnace
Transportation through shrink tunnel
Transportation of rice cooking cauldron
Transportation of bread after oven
Transportation through furnace
Transportation through washing process using hot water of high concentration chemicals
Transportation of syringes through drying process
High speed transportation after seamer

Note) 1. KV150 does not conform to Food Sanitation Act
Note) 2. KV150 is only for dry condition
Note) 3. Also refer to the precautions for KV series on the catalog
Note) 4. Operating Temperature Range : -20～150℃ (KV150) , -20～180℃ (KV180) , -20～250℃ (KV250)

■ The maximum operating temperature

150℃ (Package symbol ) : KV150
180℃ (Package symbol ) : KV180
250℃ (Package symbol ) : KV250

■ Maximum Speed

200m/min (In case of plastic top chains )

■ Chemical resistance

Excellent chemical resistance against chemicals for sterilizing and washing

■ Electroconductive

Less generation of static electricity due to its low specific volume resistivity (1 X 10⁶Ω・cm) Suitable for preventing dust adhesion and sparks

■ Flame-retardant

Conforms to UL Standard V-0 classification. (The highest flame-retardant class )

Note) Except KV150

■ Noise

Louder by 2~3 db. (Compared to Standard Series )

■ Applicable chain

BTC6, TPU826-T, RSP40 etc

(Drag to move. )

Low-friction/ Wear-resistant 　[ Package symbol : HG ]

Low-friction and wear-resistant polyacetal link

Color : Navy blue [HG]

■ Application

Before the packaging process where lubricants cannot be used and wear debris generation matters
For high speed running processes such as beverage industry, inspecting, laser marking and single filer
Dry running process in beverage industry

■ Countermeasure for wear-debris

Wear resistance increased by 20% compared to low friction/wear resistant series (LF). Can be replaced with HG series without mi\odifying the conveyor or changing sprockets. (Recommend replacing wearstrips as well as chains Recommend using low friction /wear resistant PLF series )

■ To protect products conveyed

Reduces line pressure and scratches to the products during accumulation due to its coefficient of friction , which is as same as LF series, 14% to 45% lower than compared to Standard series

■ Comparison of wear against other series

※The upper graph is result of in-house test Operating temperature of the value in parentheses is for using UHMW-PE-made nose bars. No lubrication is needed in case of using nose bars made of SJ-CHO(special polyamide) Chain Type : TTP826、 Chain speed : 60m/min、 Ambient Temperature 、 Dry condition
Notes
Company A etc. Wear Resistant chain made by company A , Material of the link : Polyester
Company B etc. Wear Resistant chain made by company B , Material of the link : Polyacetal

■ Applicable chain

WT1506-K, TTP826, RSP50 etc

(Drag to move. )

High Temperature Specifications 　[ Package symbol : HTW ]

Adopts Polypropylene for chain link

Color : White [HTW]

■ Application

Chain for pasteurizer
Conveyor for transporting batteries.
Slightly inclined conveyor.

■ The maximum operating temperature : 105℃

Suitable for pasteurizer using hot water in beverage factory

■ Chemical resistance

Excellent chemical resistance against acid and alkali

■ High friction

Coefficient of friction is 1.2 to 1.6 times higher than Standard series. Possible to convey slightly inclined in dry application

■ Lightweight

Lighter by 40% compared to the chain made of polyacetal. Effective for reducing motor power

■ Applicable chain

WT1907-K, WT2506-K, TTPM500 etc

Note) 1. The maximum allowable tension is about 40% of the Standard series
Note) 2. Operating Temperature Range ：5～105℃

(Drag to move. )

High speed Specifications :Exclusively use under dry condition. 　[ Package symbol : HS ]

Adopts special engineering plastic for chain link

Color : Beige [HS]

■ Application

High-speed transportation of the empty cans

■ Maximum Speed

High limiting PV value for 230 m/min. straight line Prevents melting at high speeding

■ Applicable chain

TPU826-T, TP-OTD32 etc

Note) 1. The maximum allowable tension is about 80% compared to Standard series
Note) 2. Only available for stainless-pin type
Note) 3. Exclusively use under dry condition.
Note) 4. Recommend using cold rolled stainless steel for wearstrip for high speed conveyor, and also recommend to use SJ-CNO depending on the condition
Note) 5. Operating Temperature Range ：-20～50℃

(Drag to move. )

Low Temperature Series 　[ Package symbol : LTW ]

Adopts polyester for chain link

Color : White [LTW]

■ Application

Transportation of frozen foods in freezer
Transportation of dry ice.

■ Low ambient temperature

Can be used under the environment where the temperature below -70℃.
(Standard series for -20℃ )

■ Chemical resistance

Superior corrosion resistance against chemicals

■ Applicable chains are followings.

BTN5, BTC6, BTN6, BTC8

Note) 1. The maximum allowable tension is about 33% compared to Standard series
Note) 2. Contact a Tsubaki representative for special sprocket for the environment where the ambient temperature is below -20℃
Note) 3. Operating Temperature Range ：-70～60℃

(Drag to move. )

Chemical Resistant 　[ Package symbol : Y ]

Adopts special engineering plastic for chain link

Color : Matte white [Y]

■ Application

Transportation in production process of lithium-ion batteries
Transportation of printed circuit boards and silicon wafers through washing process
For outfeed conveyor of aseptic filling room
Conveyors if food processing lines that use chemical solutions for cleaning

■ Chemical resistance

Corrosion resistance against many chemicals such as organic solvent, inorganic hydrochloric acid, alkali, oxidants and acetis acid.

■ Shock resistance

Excellent impact resistant compared to Standard series

■ Applicable chain

TTP826, TPRF2040, RSP35 etc

Note) 1. The maximum allowable tension is about 50% compared to Standard series
Note) 2. Coefficient of friction is as same as Standard series
Note) 3. Do not use in presence of open flame and/or environment under high temperature

(Drag to move. )

Super chemical resistance 　[ Package symbol : SY ]

Adopts special engineering plastic for chain link

Color : Matte white [SY]

■ Application

Transportation in production process of lithium-ion batteries
Transportation of printed circuit boards and silicon wafers through washing process
For outfeed conveyor of aseptic filling room
Conveyors if food processing lines that use chemical solutions for cleaning

■ Adopts titanium for pin material

Improves chemical resistance due to replacing pins to titan-made knurled pin

■ Chemical resistance

Superior corrosion resistance against highly corrosive chemicals such as hydrochloric acid and sulfuric acid

■ Applicable chain

TTP826, RSP40 etc

Note) 1. The maximum allowable tension is about 50% compared to Standard series
Note) 2. Coefficient of friction is as same as Standard series
Note) 3. Not available for D-shaped pin and plastic pin
Note) 4. Do not use in presence of open flame and/or environment under high temperature
Note) 5. Operating Temperature Range ：-20～80℃

(Drag to move. )

Electroconductive 　[ Package symbol : E ]

Adopts special engineering plastic for chain link

Color : Black [E]

■ Application

Transportation of printed circuit boards after soldering
For infeed/outfeed of laminating process and transportation to cutter of solar panels
Countermeasure against static electricity generated by accumulation of cans
Countermeasure of static electricity after washing and drying process
Transportation of automotive electrical components

■ Excellent electroconductive

Specific electrical resistivity: 1×106Ω・cm (Specific electrical resistivity of Standard series: 1×1014～15Ω・cm )

■ Suppression of static electricity

Suppress noises and sparks
Note) Entire conveyor must be grounded using steel sprockets and rails

■ Applicable chain

WT0705-W, TTP826P, RSP35 etc

Note) 1. The maximum allowable tension is about 70% compared to Standard series
Note) 2. Coefficient of friction is as same as Standard series

(Drag to move. )

Impact Resistant :Exclusively use under dry condition. 　[ Package symbol : DIA ]

Adopts special engineering plastic for chain link

Color : Cream [DIA]

■ Application

Transportation of medium-load machined products
Transportation of trays in bakery factory
Transportation of food directly on the conveyor under the dry environment
Slightly inclined food conveyors

■ Super Impact resistant

Chain is hard to chip when subjected to impact, and even if the chain breaks, debris does not shatter. Suitable for preventing contamination by foreign matters. )

■ High friction

Coefficient friction is 1.2 times higher compared to Standard series Can be used for slightly inclined transportation under dry condition

■ Lightweight

About 20% lighter than polyacetal-made plastic top chain Easy to handle and effective for reducing motor power

■ Impact resistance (difficult to chip when impact is applied)

■ Applicable chain

BTC8H-826-M, TPUSR550-T, RSP60-2 etc

Note) 1. The maximum allowable tension is about 75% compared to Standard series
Note) 2. Exclusively use under dry condition.

(Drag to move. )

Impact Resistant :Available for both wet and dry conditions 　[ Package symbol : DIY ]

Adopts special engineering plastic for chain link

Color : Green [DIY]

■ Application

Transportation of food/container under wet condition
In case of sterilizing frequently
To prevent chains from chipping

■ Shock resistance

More resistant to chipping or shattering when the chain is subjected to impact compared to polyacetal

■ Chemical resistance

Excellent chemical resistance against chemicals for sterilizing and washing Suitable for conveyors sterilizing frequently

■ Anti-adhesive

Effective to prevent products sticking to the conveyor

■ Impact resistance (difficult to chip when impact is applied)

■ Ultraviolet Resistant

Higher weather resistant compared to polyacetal

■ Applicable chain

BTC6, TPRF2040, RSP60 etc

Note) 1. The maximum allowable tension is about 75% compared to Standard series
Note) 2. Coefficient of friction is as same as Standard series
Note) 3. Shattered fragments may scatter under certain conditions, such as during use at low temperature
Note) 4. Do not use in presence of open flame and/or environment under high temperature

(Drag to move. )

Middle friction series :Exclusively use under dry condition. 　[ Package symbol : MF ]

Adopts special polyacetal for chain link

Color : Yellow [MF]

■ Application

Inclined 3 to 5 degree
Prevents excessive slippage through inspecting and printing process
※ Depends on the product conveyed

■ Suitable for inclined transportation

Suitable for inclined transportation due to moderate frictional material

■ Stable transportation

Prevents misalignment that occurs during startup and stoppage, and slippage of the products as the conveyor accelerates

■ Applicable chain

BTC6, TTUP826P, RSP40 etc

Note) 1. The maximum allowable tension is about 75% compared to Standard series
Note) 2. Coefficient of friction is 1.1 times higher than Standard series
Note) 2. Exclusively use under dry condition.
Note) 4. Operating Temperature Range : -20～80℃

(Drag to move. )

Heat/Radiation/Vacuum resistant series 　[ Package symbol : PK150 ]

Adopts PEEK resin for chain and pin

Color : Light brown [PK150]

■ Application

Use in high temperature environment such as furnaces and ovens. Use as transfer units to/from ovens.
Environment using chemicals for cleaning/sterilization.
Transportation through vacuum environment

■ The maximum operating temperature ：150℃

■ Chemical resistance

Superior corrosion resistance against chemicals

■ Radiation resistance

The highest level of radiation resistance among other thermoplastic elastomers

■ Less outgassing in vacuum environment

■ Uses materials certified by FDA(US Food and Drug Administration)

■ Applicable chain number

WT0405-W

Note) Operating Temperature Range : -20～150℃

(Drag to move. )

Antibacterial/Mold Resistant 　[ Package symbol : MWS ]

Adopts antibacterial agent-compounded low friction/wear resistant polyacetal

Color : Cream [MWS]

■ Application

Countermeasure for washing process in bottling factory
For conveyors where food is placed directly or before seamer
Wet condition caused by moisture and dew condensation
(Especially for shower or autoclave unloader )
Suitable for mold prevention or to use in the area where conveyor becomes dirty easily

■ Antibacterial + mold protection: Uses original antibacterial agent developed jointly with antibacterial agent manufacturer As well as being effective against the most dangerous bacteria in the food industry, such as colon bacillus(E. coli), staphylococcus and lactobacillus, its anti-mold properties are effective against blue and other forms of mold
■ Sustainability: Adopts long-life inorganic antimicrobial agent Because the antimicrobial agent is mixed uniformly into the plastic during manufacturing process, the antimicrobial and anti-mold functions remain strong even if the the surface of the chain wears
■ Safety: Highly safe antimicrobial agent The base material complies with Japan's Food Sanitation Act (Ministry of Health Notification No. 370) and the additional antimicrobial and anti-mold functions ensure further safety. (The material of the link, however, is ineligible for possitive list as of January 1st, 2022)
■ High function: No change in performance arises from the addition of the antimicrobial agent, ensuring excellent low friction/wear resistant properties Uses Low friction/Wear resistant material for link

Note) 1. The maximum allowable load is as same as Standard series
Note) 2. Coefficient friction is as same as Low friction/Wear resistant series

Antibacterial/Mold Resistant

35℃ X After 24 hours (Saccharomyces )
Equivalent to LF materials		MWS series

※Testing method
JIS Z2801：2010

Test organization　K. K. Eisei Biseibutsu Kenkyu Center
Issued date of certificate of analysis　October 12, 2020
Issued number of certificate of analysis　2020D-BT-0808

Test result for antibacterial activity (Compared to test media without antibacterial agent )

Tested bacteria	Tested specimen	Immediately after inoculation	35℃ X After 24 hours
E. coil	MWS	1.5 X 10⁴	38
E. coil	(Chain without antibacterial agent )	1.5 X 10⁴	22 X 10⁶
Staphylococcus aureus	MWS	1.6 X 10⁴	Not detected
Staphylococcus aureus	(Chain without antibacterial agent )	1.6 X 10⁴	1.5 X 10⁵
Saccharomyces (A type of yeast )	MWS	2.5 X 10⁴	Not detected
Saccharomyces (A type of yeast )	(Chain without antibacterial agent )	2.5 X 10⁴	1.4 X 10⁴
Lactobacillus	MWS	6.4 X 10⁵	1.3 X 10²
Lactobacillus	(Chain without antibacterial agent )	6.4 X 10⁵	6.9 X 10⁴
Pathogenic E. coil O-157(H7)	MWS	1 X 10^3.9	Not detected
Pathogenic E. coil O-157(H7)	(Chain without antibacterial agent )	1 X 10^3.9	1 X 10^3.4

Test result of fungal growth (Compared to test media without antibacterial agent )

Test fungus	Tested specimen	After 7 days	After 14 days	After 21 days
Black mold	MWS series	0	0	0
Black mold	(Chain without antibacterial agent )	0	1	2

●Method of rating test result

Display	Descriptions
0	No fungus growth evident with the naked eyes or under a microscope
1	No fungus growth trace with the naked eyes. Trace fungus growth under a microscope
2	Little fungus growth evident (coverage of less than 25% of surface of test specimen)
3	Moderate fungus growth evident (coverage of 25%~50% of surface of test specimen)
4	Heavy fungus growth evident (coverage of 50%~100% of surface of test specimen)
5	Heavy fungus growth evident (coverage of 100% of surface of test specimen)

※Testing method
JIS Z2911-2000(A)

Test organization Ishizuka Glass Co., Ltd.
Issued date of certificate of analysis　September 25, 2020

(Drag to move. )

Metal Detectable Specifications 　[ Package symbol : MPD/MPW ]

Adopts special engineering plastic for chain link

Color : Black [MPD/MPW]

■ Application

Transportation of rubber compound
Transportation of food directly on the conveyor before packaging process
Transportation of noodles directly on the conveyor (Package symbol ：MPW)
Transportation of trays in bakery factory (Package symbol ：MPD)

■ Detectable by metal detector

Even if the chain is broken and entered into rubber compounds or food products, broken chips and fragments can be detected by metal detectors

■ Shock resistance

Hard to chip even if the impact is applied

■ Applicable chain

TTUP826, RSP60-CU-2 etc

Note) 1. MPD is only for dry condition, MPW is for dry and wet conditions
Note) 2. The maximum allowable load compared to Standard series, MPD: about 80%, MPW: about 40%
Note) 3. Operating Temperature Range : -20～80℃ (MPD), -20～60℃ (MPW)

(Drag to move. )

Low temperature and chemical resistant series 　[ Package symbol : UPE ]

Adopts UHMW-PE for link material

Color : Matte white [UPE]

■ Application

Transportation through freezer
Transportation of frozen foods in freezer
Food conveyors that use chemicals for cleaning and as a measure against contamination
Transportation for secondary batteries requiring chemical resistant
Environment using chemicals for cleaning/sterilization.

■ Low ambient temperature

Can be used under the environment where the temperature below -70℃. (Standard series for -20℃ )

■ Shock resistance

Excellent impact resistance minimizes contamination even under low temperature
Impact resistance 13 times higher using under the ambient temperature and 26 times higher under low temperature compared to polyacetal

■ Wear Resistant

The amount of wear is decreased to 80% compared to polyacetal-made chains under the ambient temperature

■ Chemical resistance

Superior corrosion resistance against chemicals

■ Uses materials certified by FDA(US Food and Drug Administration)

■ Applicable chain number

RSP80

Note) 1. The maximum allowable tension is about 30% compared to Standard series
Note) 2. Operating Temperature Range : -70～60℃
Note) 3. Contact a Tsubaki representative for special sprocket for the environment where the ambient temperature is below -20℃
Note) 4. Recommend using cold rolled stainless steel for wearstrip For the material of wearstrip, we do not recommend using UHMW-PE due to same material with chain

(Drag to move. )

Acid Resistant 　[ Package symbol : AR ]

Adopts special polyacetal for chain link

Color : White [AR]

■ Corrosion resistance

Superior corrosion resistance compared to Standard and low friction/Wear resistant series

■ Corrosion protection

Suitable for corrosion resistance against soapy water containing sodium hypochlorite

■ Applicable chain

TTP826, RSP35 etc

Note) 1. Use chemical resistant Y series or super chemical resistant SY series under the environment of strong acid and/or strong alkali
Note) 2. The maximum allowable tension is about 90% compared to Standard series
Note) 3. Coefficient of friction is as same as Standard series
Note) 4. Not available for plastic pin
Note) 5. Cannot be used under the environment where using water hotter than 60℃.
Note) 6. Operating Temperature Range ：-20～ (60) 80℃ (60) is for wet condition

(Drag to move. )

Ultraviolet Resistant series 　[ Package symbol : UVR ]

Adopts special polyacetal for chain link

Color : Light silver [UVR]

■ Application

Conveyance in outdoor environment where products are exposed to UV rays.
Countermeasure against UV degradation for longer life than Standard series

■ Ultraviolet Resistant

Excellent resistance to outdoor UV degradation (discoloration and loss of strength) compared to Standard series and LF series

■ Applicable chain

TTP826, TTPH826P, RSP50 etc

Note) 1. Same maximum allowable tension and coefficient of friction as Standard series
Note) 2. Also available for plastic pin type
Note) 3. Operating Temperature Range ：-20～ (60) 80℃ (60) is for plastic pin type under wet condition

(Drag to move. )

Food conveying series 　[ Package symbol : PFS ]

Adopts polyacetal for chain link

Color : Nile blue [PFS]

■ Application

Cooling line for Bakery Industry
Other transportation for food producing

■ Conforms to PIM(EU's Plastic Implementation Measure)

Uses Tsubaki original material that comply with the EU's Plastic Implementation Measure (PIM)

■ Applicable chain

TTP826, RSP40-T-CU etc

Note) 1. Same maximum allowable tension and coefficient of friction as Standard series
Note) 2. PIM(EU Plastics Implementation Measure) is essential regulation for offering plastic products on the EU that may come into direct contact with conveyed food
Note) 3. Plastic pin types do not conform to PIM (EU Plastic Implementation Measure)

(Drag to move. )

Biomass series (BP) 　[ Package symbol : BP ]

Adopts environmentally friendly biomass plastic for link material

Color : Dark green [BPG]

■ Environmentally friendly product

Not only saving oil resources by using plant-derived environment-friendly biomass plastic, but also it will be anticipated to reduce CO2 by carbon neutrality of which biomass plastic has.

※バイオマスプラスチックとは：原料として植物などの再生可能な有機資源を使用するプラスチック素材

■ Applicable chain

Only for RSP40

Note) 1. The maximum allowable tension is about 36% of the Standard series
Note) 2. Operating temperature range: -20℃ to 80℃
Note) 3. Exclusively use under dry condition.
Note) 4. Recommend using in the ambient humidity range from 20% to 80%. Contact a Tsubaki representative for using under the humidity other than this range.
Note) 5. Do not conforms to Food Sanitation Act (Ministry of Health Notification No.370)
Note) 6. The color may be uneven due to the property of biomass. No effect to its performance.

TSUBAKI Power Transmission Products Information Site

Selection Guide Top chain

WT1505-K

WT1505G-K

WT1505GTO-K

WT1506-K

BTN5

BTN5-A

BTC6

BTCP6

BTC6-T

BTO6

BTN6

WT1907-K

BTC8

BTC8-A

BTC8S

WT2250FG

WT2250FGWith flights

WT2250VG

WT2505-K

WT2506-K

BTM8H

WT2705-K

WT2706-K

WT3005-K

WT3005G-K

WT3086-K

WT3086G-K

WT3816-K

WT3827-K

WT3835-K

BTH16

WT5707-K

BTC4-M

WT1505G-M

WT1505GTO-M

WT1505TOD-M

WT1515G-M

BTC8H-M

BTM8H-M

WT2505-M

WT2505G-M

WT2505TOD-M

BTO8-M

WT3005G-M

WT3086G-M

WT3835G-M

WT3835-T

TTP

TTP-P

TTPH

TTPH-P

TTPT

TTPDH

TTPM

TPF

TP-OTD

TPS

TPS-P

TPH

TPH-P

TPSS

TPM

TPM-SN

TPM-P-SN

TPRF2040

TPRF2060

TTUP

TTUP-P

TTUP-M

TTUPT-M

TTUPH

TTUPS

TTUPS-H

TTUPM-P

TPU

TPU-P

TPU-LH

TPUT-LH

Selection Guide 　Top chain