Plastic top chain Curved chain TPCC/TPCC-T
- Chain pitch
63.5mm - Sideflexing
- Simple plastic chain with an offset shape, ideal for conveying cases, etc.
Features
- ・Simple plastic chain with an offset shape, ideal for conveying cases, etc.
- ・TPCC420-T is a chain for sideflexing with float-preventive attachments (tabs) Prevents the chain from floating on corner section and ascending/descending conveyors, and scratches on top surface of plate on return side.
■Application
The following are the industries we recommend.
May not be used depending on conveying capacity (conveyor speed), material to be conveyed (weight, shape), environment and application.
Use as a guide when selecting.
Contact us if there are any applications or conditions not described.
Recommended industry /Conveyed material size (●：Recommended ○：Can be used △：Varies depending on conveying conditions. )
| Conveying size (Weight ) |
Industry | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Can manufacturing | Beverages | Tire | Mechanical parts | Logistics | Pharmaceuticals | Bakery/Food | Secondary battery | Semiconductor ・ Solar panel related |
|
| High | △ | ● | △ | ● | ● | △ | ● | △ | △ |
| Medium | △ | ● | △ | ● | ● | △ | ● | △ | △ |
| Low | △ | ● | △ | ● | ● | △ | ● | △ | △ |
Application
- ■Plastic case, pallet conveyor
List of Models
※Click "model" for more information
| Chain pitch mm | 63.5 | |
|---|---|---|
| Application | Sideflexing | |
| Chain type | - | |
| - | ||
| Base chain specifications | - | |
| Pin type | Stainless steel pin type | |
| Pin material | Equivalent to 304 Stainless Steel | |
| Pin shape | Stepped round pin | |
| Top plate thickness mm | - | |
| Material of the pusher | - | |
| Other functions | - | With float-preventive tabs |
| Model | TPCC | TPCC-T |
|
 |
|
| Top plate width mm | 42.0 | |
Notes
1.Plastic pin type is not available.
2.Connecting pins not sold separately.
3.The shape of TPCC420 has been changed from January 1, 2019. Refer to the following for details.
■Shape change of TPCC420
- *The radius of link bottom was reduced so that the top and bottom of chain can be identified (see "1" circled in red below), and a “TOP” stamp was added to the top side.
- *Minimum side-flexing radius was changed from R700mm to R650mm.
- *Tab thickness and shape of TPCC420-T was changed.
-
*About compatibility
Chains can be replaced from old to new model as they are compatible on conveyors.
Sprocket can also be used as is. However, old and new models cannot be connected. - *The link shape of TPCC420 has been changed from January 1, 2019.
