Accessories for Plastic modular chain

Large lineup of conveyor peripheral parts such as dedicated sprockets, idlers, plastic rails, set collars, chain guide parts, frame support parts, product guide parts and bearing units are available.

Click on the images below to see how to use each accessory.

Accessories for Plastic modular chain

 

 

×
(Drag to move. )

Sprocket

  • ・Application

    Product to transmits the power of motor to the chain.

    Install to a drive shaft of conveyor.

  • ・Usage image

    Sprocket

    [Click to enlarge ]

×
(Drag to move. )

Idler wheels/Idler Sprockets

  • ・Application

    Install to a driven shaft of conveyor.

×
(Drag to move. )

Nose Bars

  • ・Application

    Dead space between conveyors can be minimized by installing nose bars at their ends.

    Suitable for conveying small product where there is a risk of product remaining between conveyors.

  • ・Usage image

    Nose Bars

    [Click to enlarge ]

×
(Drag to move. )

Dead Plate

  • ・Application

    Supports smooth transfer between in-line layout conveyors with nose bars at their ends.

  • ・Usage image

    Dead Plate

    [Click to enlarge ]

×
(Drag to move. )

Transfer plate

  • ・Application

    Eliminates the gaps in transfer areas of raised rib type Plastic Modular chains.

    Prevents winding or catching of conveyed product and realizes smooth transfers.

  • ・Usage image

    Transfer plate

    [Click to enlarge ]

Accessory list for Plastic modular chain

Search for applicable accessories for the chain model number .

Accessorie model No.


※Click the model No. for detailed information. Click to enlarge the diagram drawing.

Sprocket

Applicable Series
(Click here for a list
of all series. )
Applicable chain number Applicable Chain pitch
mm
Number of teeth
Wide type Mold-to-Width type
WT0400  WT0405-W - 4.5 16, 20, 24, 32, 40

Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Plain bore Diameter
mm
Type
WT-S0400-16T 16 23.07 Bore shape
and size
are
made-to-order.
Φ8 Integrated type
WT-S0400-20T 20 28.77
WT-S0400-24T 24 34.48
WT-S0400-32T 32 45.91
WT-S0400-40T 40 57.35

The sprocket has no heat resistance or chemical resistance.
Contact a Tsubaki representative when using in special environments or usage conditions.

WT0700  WT0705-W WT0705-M 7.5 15, 24, 32, 48




Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N0700-15T18 15 36.07 Φ18 Integrated type
WT-N0700-24T■ 24 57.46 Φ20, Φ25, Φ30
WT-N0700-32T40S 32 76.52 □40
WT-N0700-48T■ 48 114.67 Φ30, □40, Φ50
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N0700-24T20 24 57.46 Φ20 Integrated type
WT-N0700-24T25 Φ25
WT-N0700-24T30 Φ30
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N0700-48T30 48 114.67 Φ30 Integrated type
WT-N0700-48T40S □40
WT-N0700-48T50WK Φ50
BT4  - BTC4-M 12.7 10, 24


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BTC4-10T18 10 41.1 Φ18 Integrated type
BTC4-24T30 24 97.3 Φ30
WT1500/1510/3000/3080,BT5  BTN5, BTN5-A, WT1505G-K, WT1505GTO-K, WT1505GTORN-K, WT1505-K, WT1505RN-K, WT1506-K, WT1515F-W, WT1515G-W, WT1515T-F-W, WT1515VG-W, WT1515-W, WT1516F-W, WT1516T-F-W, WT1516-W, WT3005G-K, WT3005-K, WT3086G-K, WT3086-K WT1505G-M, WT1505GTO-M, WT1505TOD-M, WT1515G-M, WT3005G-M, WT3086G-M 15, 30 12, 18, 24, 25, 27, 31, 32, 33







N1500 Solid Sprockets (Molded)
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N1500-12T30 12 57.96 Φ30 Integrated type
WT-N1500-18T40S 18 86.38 □40 Integrated type
Split Sprockets (SW1500)
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-24T■ 24 114.9 Φ25, Φ30, Φ35, Φ40, □40 Split
WT-SW1500-32T■ 32 153.0 □40, □50, □60
WT-SW1500-33T■ 33 157.8 □40, □65
×
(Drag to move. )
■SW1500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-24T25 24 114.9 Φ25 Split
WT-SW1500-24T30 Φ30
WT-SW1500-24T35 Φ35
WT-SW1500-24T40 Φ40
WT-SW1500-24T40S □40
×
(Drag to move. )
■SW1500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-32T40S 32 153.0 □40 Split
WT-SW1500-32T50S □50
WT-SW1500-32T60S □60
×
(Drag to move. )
■SW1500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-33T40S 33 157.8 □40 Split
WT-SW1500-33T65S □65
Solid Sprockets (S1500)
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Plain bore Diameter
mm
Type
WT-S1500-24T 24 114.9 Bore shape
and size
are
made-to-order.
Φ20 Integrated type
WT-S1500-25T 25 119.7
WT-S1500-27T 27 129.2
WT-S1500-31T 31 148.3
WT-S1500-32T 32 153.0
WT-S1500-33T 33 157.8
WT1900  WT1907-K - 19.05 17, 21, 24, 25


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S1900-17T 17 104.6 Bore shape
and size
are
made-to-order.
Integrated type
WT-S1900-21T 21 129.0
WT-S1900-24T 24 147.3
WT-S1900-25T 25 153.4
WT-SW1900-25T■ 25 153.35 Φ40, Φ60 Split
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1900-25T40S 25 153.35 Φ40 Split
WT-SW1900-25T60S Φ60
BT6  BTC6, BTC6RN, BTC6RN-T, BTC6-T, BTCP6, BTN6, BTO6, BTO6RN - 19.05 10, 24


Model No. Chain types
for KV150 and KV250
Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT6-10T-38H BT6-KV-10T-38H 10 61.65 Hexagonal, width across flat 38 Integrated type
BT6-24T-■ BT6-KV-24T-50S 24 145.95 □40, □50, □65
×
(Drag to move. )
Model No. Chain types
for KV150 and KV250
Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT6-24T-40S --- 24 145.95 □40 Integrated type
BT6-24T-50S BT6-KV-24T-50S □50
BT6-24T-65S --- □65
WT2250/2510  WT2250FG, WT2250VG, WT2515F-W, WT2515G-W, WT2515-W WT2515G-M 25.4 16, 18





Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T■ 16 130.20 Φ30, Φ40, □40 Split
WT-SW2510-18T■ 18 146.27 Φ30, Φ40, □40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T30 16 130.20 Φ30 Split
WT-SW2250-16T40 Φ40
WT-SW2250-16T40S □40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2510-18T30 18 146.27 Φ30 Split
WT-SW2510-18T40 Φ40
WT-SW2510-18T40S □40
WT2520,BT8S  BTC8S, WT2525-K, WT2525VG-K WT2525-M, WT2525VG-M 25.4 18,22




Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8S-18T-■ 18 146.27 □40, □60 Integrated type
WT-N2520-18T40 Φ40
WT-N2520-18T■S □38.1, □40, □50.8, □60
WT-N2520-22T90S 22 178.48 □90
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8S-18T-40S 18 146.27 □40 Integrated type
BT8S-18T-60S □60
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N2520-18T38S 18 146.27 □38.1 Integrated type
WT-N2520-18T40S □40
WT-N2520-18T51S □50.8
WT-N2520-18T60S □60
WT2500/2530,BT8  BTM8H, WT2505-K, WT2506-K BTC8H-M, BTM8H-M, WT2505G-M, WT2505-M, WT2505TOD-M, WTM2535G-M 25.4 16, 18, 21



Split Sprockets (SW2500)
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2500-16T■ 16 130.20 Φ25, Φ30, Φ35, Φ40 Split
WT-SW2500-18T■ 18 146.27 Φ25, Φ30, Φ35, Φ40
WT-SW2500-21T■ 21 170.40 Φ25, Φ30, Φ35, Φ40
×
(Drag to move. )
■SW2500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2500-16T25 16 130.20 Φ25 Split
WT-SW2500-16T30 Φ30
WT-SW2500-16T35 Φ35
WT-SW2500-16T40 Φ40
×
(Drag to move. )
■SW2500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2500-18T25 18 146.27 Φ25 Split
WT-SW2500-18T30 Φ30
WT-SW2500-18T35 Φ35
WT-SW2500-18T40 Φ40
×
(Drag to move. )
■SW2500 Split Sprockets
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2500-21T25 21 170.40 Φ25 Split
WT-SW2500-21T30 Φ30
WT-SW2500-21T35 Φ35
WT-SW2500-21T40 Φ40
Solid Sprockets (S2500)
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S2500-16T 16 130.20 Bore shape and size are
made-to-order.
Integrated type
WT-S2500-18T 18 146.27
WT-S2500-21T 21 170.42
BT8  BTC8, BTC8-A WTM2535G-M 25.4 12, 18



Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8-12T-25 12 98.14 Φ25.1 Integrated type
BT8-18T-■ 18 146.27 Φ25.1, □40, □50, □65
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8-18T-25 18 146.27 Φ25.1 Integrated type
BT8-18T-40S □40
BT8-18T-50S □50
BT8-18T-65S □65
BT8  - BTC8H-M, BTM8H-M 25.4 12, 16





Units with pre-machined shaft bores and keyway
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8H-12T■-CS 12 98.14 Φ25, Φ30 Integrated type
BT8H-16T30-CS 16 130.20 Φ30
×
(Drag to move. )
■Units with pre-machined shaft bores and keyway
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT8H-12T25-CS 12 98.14 Φ25 Integrated type
BT8H-12T30-CS Φ30
With plain bore
Model No. Number of teeth Pitch Diameter
mm
Plain bore Diameter
mm
Type
BT8H-12T-CS 12 98.14 Φ15 Integrated type
BT8H-16T-CS 16 130.20
BT8  - BTO8-M 25.4 12, 18


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BTO8-12T■ 12 98.14 Φ25, Φ30 Integrated type
BTO8-18T■ 18 146.27 Φ30, Φ40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BTO8-12T25 12 98.14 Φ25 Integrated type
BTO8-12T30 Φ30
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BTO8-18T30 18 146.27 Φ30 Integrated type
BTO8-18T40 Φ40
WT2700  WT2705-K, WT2706-K - 27.2 9, 12, 18, 20, 28







Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N2700-9T■ 9 79.53 Φ25, □40 Integrated type
WT-N2700-12T■ 12 105.09 Φ30, Φ40, □40
WT-N2700-18T■ 18 156.64 □40, □60, □65
WT-N2700-20T■ 20 173.90 □40, □60 Split
WT-N2700-28T■ 28 242.93 □40, □60
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N2700-9T25 9 79.53 Φ25 Integrated type
WT-N2700-9T40S □40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N2700-12T30 12 105.09 Φ30 Integrated type
WT-N2700-12T40 Φ40
WT-N2700-12T40S □40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N2700-18T40S 18 156.64 □40 Integrated type
WT-N2700-18T60S □60
WT-N2700-18T65S □65
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2700-20T40S 20 173.90 □40 Split
WT-SW2700-20T60S □60
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2700-28T40S 28 242.93 □40 Split
WT-SW2700-28T60S □60
WTU3010  WTU3015T-K - 30 14


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WTU-SW3010-14T■ 14 134.82 Φ30, Φ40, □40.3 Split
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WTU-SW3010-14T30 14 134.82 Φ30 Split
WTU-SW3010-14T40 Φ40
WTU-SW3010-14T40S □40.3
WT3080  - WT3085-C 30 27, 31, 33

Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Plain bore Diameter
mm
Type
WT-S3085C3-27T 27 13½ 129.7 Φ15 Integrated type
WT-S3085C3-31T 31 15½ 148.5
WT-S3085C3-33T 33 16½ 158.0
WT3100  WT3109-W - 31.75 16, 18



Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N3100-16T■ 16 162.75 □40, □60, Φ60 Integrated type
WT-N3100-18T■ 18 182.84 □40, □60
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N3100-16T40S 16 162.75 □40 Integrated type
WT-N3100-16T60S □60
WT-N3100-16T60 Φ60
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-N3100-18T40S 18 182.84 □40 Integrated type
WT-N3100-18T60S □60
WT3810  WT3816-K - 38 18, 20, 24

Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S3816-18T 18 218.8 Bore shape
and size
are
made-to-order.
Integrated type
WT-S3816-20T 20 242.9
WT-S3816-24T 24 291.1
WT3820  WT3827-K - 38.1 8, 12

Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S3820-8T 8 99.6 Bore shape
and size
are
made-to-order.
Integrated type
WT-S3820-12T 12 147.2
WT3830  WT3835-K, WT3835-T WT3835G-M 38.1 21, 23, 24, 25


Engineering Plastic Machined Components
Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S3830-1200T 24 12 147.2 Bore shape
and size
are
made-to-order.
Integrated type
WT-S3830-1212T 25 12½ 153.2
Engineering Plastic Molded Components
Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
TTP-21■ 21 10½ 129.26 Φ25, Φ30, Φ35, Φ40, Φ45 Split
TTP-23■ 23 11½ 141.22 Φ25, Φ30, Φ35, Φ40, Φ45
TTP-25■ 25 12½ 153.20 Φ25, Φ30, Φ35, Φ40, Φ45, Φ50
×
(Drag to move. )
■Engineering Plastic Molded Components
Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
TTP-21T25 21 10½ 129.26 Φ25 Split
TTP-21T30 Φ30
TTP-21T35 Φ35
TTP-21T40 Φ40
TTP-21T45 Φ45
×
(Drag to move. )
■Engineering Plastic Molded Components
Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
TTP-23T25 23 11½ 141.22 Φ25 Split
TTP-23T30 Φ30
TTP-23T35 Φ35
TTP-23T40 Φ40
TTP-23T45 Φ45
×
(Drag to move. )
■Engineering Plastic Molded Components
Model No. Number of teeth Working number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
TTP-25T25 25 12½ 153.20 Φ25 Split
TTP-25T30 Φ30
TTP-25T35 Φ35
TTP-25T40 Φ40
TTP-25T45 Φ45
TTP-25T50 Φ50
BT16  BTH16 - 50.8 16
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
BT16-16T-60S 16 260.39 □60.1 Integrated type
BT16-16T-90S □90.1
WT5700  WT5707-K - 57.15 9, 12, 14

Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-S5707-9T 9 167.0 Bore shape
and size
are
made-to-order.
Integrated type
WT-S5707-12T 12 220.8
WT-S5707-14T 14 256.8

Idler wheels

Applicable Series
(Click here for a list
of all series. )
Applicable chain number Applicable Chain pitch
mm
Equivalent no. of teeth
Wide type Mold-to-Width type
WT1500/1510/3000/3080,BT5  BTN5, BTN5-A, WT1505G-K, WT1505GTO-K, WT1505GTORN-K, WT1505-K, WT1505RN-K, WT1506-K, WT1515F-W, WT1515G-W, WT1515T-F-W, WT1515VG-W, WT1515-W, WT1516F-W, WT1516T-F-W, WT1516-W, WT3005G-K, WT3005-K, WT3086G-K, WT3086-K WT1505G-M, WT1505GTO-M, WT1505TOD-M, WT1515G-M, WT3005G-M, WT3086G-M 15, 30 24, 32


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-24T■-IW 24 114.9 Φ30.3, Φ35.3, Φ40.3 Split
WT-SW1500-32T■-IW 32 153.0 Φ30.3, Φ35.3, Φ40.3
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-24T30-IW 24 114.9 Φ30.3 Split
WT-SW1500-24T35-IW Φ35.3
WT-SW1500-24T40-IW Φ40.3
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW1500-32T30-IW 32 153.0 Φ30.3 Split
WT-SW1500-32T35-IW Φ35.3
WT-SW1500-32T40-IW Φ40.3
WT2250/2510  WT2250FG, WT2250VG, WT2515F-W, WT2515G-W, WT2515-W WT2515G-M 25.4 16, 18


Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T■IW-M 16 130.20 Φ30, Φ40 Split
WT-SW2250-18T■IW-M 18 146.27 Φ30, Φ40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T30IW-M 16 130.20 Φ30 Split
WT-SW2250-16T40IW-M Φ40
×
(Drag to move. )
Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-18T30IW-M 18 146.27 Φ30 Split
WT-SW2250-18T40IW-M Φ40
WTM2530/WT3830/BT8  - BTO8-M, BTC8H-M, BTM8H-M, WT3835G-M, WTM2535G-M 25.4, 38.1 12, 18


Model No. Equivalent no. of teeth Outer Diameter
mm
Bore diameter
mm
Type
BTO8-12T25-IW 12 86 Φ25.5 Integrated type
TP-C122■BT-IW 18 129.8 Φ25, Φ30, Φ40
TP-C120■BT-IW Φ25, Φ30, Φ35, Φ40 Split
×
(Drag to move. )
Model No. Equivalent no. of teeth Outer Diameter
mm
Bore diameter
mm
Type
TP-C12200BT-IW 18 129.8 Φ25 Integrated type
TP-C12201BT-IW Φ30
TP-C12203BT-IW Φ40
×
(Drag to move. )
Model No. Equivalent no. of teeth Outer Diameter
mm
Bore diameter
mm
Type
TP-C12077BT-IW 18 129.8 Φ25 Split
TP-C12078BT-IW Φ30
TP-C12079BT-IW Φ35
TP-C12080BT-IW Φ40

Nose Bars

Accessory name
(Click here for a list
of all series. )
Applicable chain number
Wide type Mold-to-Width type
Nose Bars for WT0705-W   WT0705-W -

Type Base Model No. Width
mm
Sliding Series WT-NB07-W50 50
Nose Bars for WT0705-M   - WT0705-M
Type Base Model No. Width
mm
Sliding Series WT-NB07-W30 30
Nose Bars for WT1500/1510 series   WT1505GTO-K, WT1505GTORN-K, WT1505-K, WT1505RN-K, WT1506-K, WT1515VG-W, WT1515-W, WT1516-W, WT1515G-W WT1505GTO-M, WT1515G-M



Type Base Model No. Width
mm
Sliding Series WT-NB 76, 151, 302, 50, 99
WT-NBG 50, 99
Integrated Bearing Series WT-NR 76(75.5), 151
Nose Bars for BT5 Series   BTN5, BTN5-A -

Type Base Model No. Width
mm
Integrated Bearing Series BT5-NB 75, 151

Dead Plate

Accessory name
(Click here for a list
of all series. )
Applicable chain number
Wide type Mold-to-Width type
Dead plates for WT1500/WT1510 series   BTN5, BTN5-A, WT1505-K, WT1505RN-K, WT1506-K, WT1515-W, WT1516-W -

Base Model No. Length
mm
WT-DP 400, 550, 700, 850

Transfer plate

Accessory name
(Click here for a list
of all series. )
Applicable chain number
Wide type Mold-to-Width type
Transfer plate for WT1900 series   WT1907-K -


Model No. Length
mm
Width
mm
WT-TP1907-L114 114.3 150
WT-TP1907-L190 190.5 150
Transfer plate for WT3820 series   WT3827-K -

Model No. Length
mm
Width
mm
WT-TP3827-L152 152 151
Transfer plate for WT5700 series   WT5707-K -

Model No. Length
mm
Width
mm
WT-TP5707-L220 220 151