Selection Guide Cable Carriers (CABLEVEYOR)
Abundant Product Lineups
Cable system dedicated for clean rooms
Freestanding flat cable systems
Supply cable carrier + cable / hose as a set
Plastic Series
Plastic cable carrier with a wide product lineup from small to large size and easy to handle.
Most suitable plastic cable carrier according to the applications can be selected, such as popular and wide-variation TKP Series, TKR Series with low noise and low dust generation, and TKZP Series with zip construction that can be easily set cables, etc.
Steel Series
Steel cable carrier with high strength, high rigidity, and excellent durability.
Wide variety of products are available, such as TK Series with machining stay bores to match the cable diameter, closed type TKF Series to protect cables from dust and spattering, and LS-Series with excellent dynamic function thanks to lightweight.
Special types such as stainless steel types and circular travel arrangement are also available.
3D Series
Cable carrier that enables free movement in 3-dimensional space.
Made of polyamide resin, it is lightweight and has high toughness.
Connection between the connector and the base chain is single-touch, and the joint is waterproof.
Three-dimensional space can be moved freely, as well as fixed piping.
Connection of link-link and link-end link is spherical and fit loosely.
This spherical surface follows three-dimensional movement and twist (rotation).
Bending radius (R100) is limited by the end face of link.
Steel wires support large tension.
Open structure allows cables to be pushed in and inserted, making maintenance work easy.
Ideal for turning robots.
Open type
Basic type with a wide lineup of products from small to large sizes.
Economy, short lead-time, and easy cutting.
| Inner height | 10～80 |
|---|---|
| Inner width | 6～500 |
| Bending radius | 18～500 |
Open type
High-performance cable carrier plastic series with improved cable-protection and cleanliness thanks to the use of high slidability engineering plastic material.
Since it is identical to TKP standard dimension, it can be used for a wide range of products.
| Inner height | 10～32 |
|---|---|
| Inner width | 10～103 |
| Bending radius | 18～200 |
Open type
Due to unique bending structure that utilizes short pitch and plastic sag, there is no sliding wear between pins and pin-holes, achieving top-class low noise and cleanliness (low dust generation).
Can be cut and adjusted the length.
(Achieved low noise 40dB (A) and cleanliness ISO class 3 )
| Inner height | 22, 28, 40, 52 |
|---|---|
| Inner width | 20～200 |
| Bending radius | 40～200 |
Open type
Due to short pitch continuous link structure, there is no contact between links, resulting in low noise and low dust generation.
Excellent in durability, it runs smoothly even at high speeds.
It is a continuous link structure that renewed the conventional link structure.
| Inner height | 28, 42, 58, 72 |
|---|---|
| Inner width | 36～378 |
| Bending radius | 60～370 |
Open type
Cables and hoses can be set just by wrapping cable carrier around cables/hoses and close zip part on inward.
Enables quiet, low wear operation thanks to its short-pitch and link-less structure.
| Inner height | 13 |
|---|---|
| Inner width | 10, 15 |
| Bending radius | 50 |
Open type
Its unique link construction provides quiet operation and is lightweight, compact, and easy to handle.
| Inner height | 26, 38, 44 |
|---|---|
| Inner width | 25～250 |
| Bending radius | 52～300 |
Open type
Multi-layered separation is possible for all sizes. Vertical dividers can be fixed on one side, both sides or slide on both sides.
A multifunctional cable carrier that can handle special widths from 24 mm to 192 mm in 8 mm increments.
| Inner height | 28, 42, 58, 72 |
|---|---|
| Inner width | 24～503 |
| Bending radius | 55～500 |
Open type
Uses aluminum stays with excellent protection against cables.
Width can be adjusted in 1mm increments, making it suitable for use in limited spaces.
| Inner height | 33, 46, 60, 80 |
|---|---|
| Inner width | 50～800 |
| Bending radius | 60～500 |
Open type
Cross-sectional height inside link is the largest series.
For aluminum stays, the width size can be set in 1 mm increments.
Highly rigid steel brackets are used. Variety of seperations are possible.
| Inner height | 108 |
|---|---|
| Inner width | 200～1000 |
| Bending radius | 250, 300, 350, 400, 450, 500, 550 |
Close type
Fully closed structure protects cables and hoses from dust and spatter.
Multi-layered separation is possible.
| Inner height | 26, 38.5, 54.5, 68.5 |
|---|---|
| Inner width | 56～306 |
| Bending radius | 75～500 |
Close type
Fully closed structure protects cables and hoses from dust and spatter.
Multi-layered separation is possible.
| Inner height | 54.5 |
|---|---|
| Inner width | 100～400 |
| Bending radius | 140, 170, 200, 290, 380 |
Close type
Plastic covers are attached to the inside and outside.
Can be changed from TKLC type (open type) to closed type. (※Limited to some sizes )
| Inner height | 33, 46, 60 |
|---|---|
| Inner width | 50～400 |
| Bending radius | 60～500 |
Close type
Cross-sectional height inside link is the largest series.
For aluminum stays, the width size can be set in 1 mm increments.
Highly rigid steel brackets are used. Variety of seperations are possible.
| Inner height | 105 |
|---|---|
| Inner width | 200～1000 |
| Bending radius | 250, 300, 350, 400, 450, 500, 550 |
Open type
Cables and hoses can be set just by wrapping cable carrier around cables/hoses and close zip part on inward.
Enables quiet, low wear operation thanks to its short-pitch and link-less structure.
| Inner height | 13 |
|---|---|
| Inner width | 10, 15 |
| Bending radius | 50 |
Open type
Simple structure with integrated openable stays and links.
Hinge stay can be opened and closed quickly and easily, and damper construction provides high strength and high rigidity.
| Inner height | 20 |
|---|---|
| Inner width | 25, 38 |
| Bending radius | 28, 38, 48, 75, 100 |
Open type
Swivel stay structure integrated with link allows efficient storage of cables and hoses.
High strength and high rigidity have been achieved by link-to-link disconnection prevention structure.
| Inner height | 33, 46, 60 |
|---|---|
| Inner width | 50～400 |
| Bending radius | 60～500 |
Close type
Fully closed structure protects cables and hoses from dust and spatter, and is high-strength and high-rigidity cable carrier plastic series.
| Inner height | 30～80 |
|---|---|
| Inner width | 28～400 |
| Bending radius | 67～500 |
Close type
Fully closed structure protects cables and hoses from dust and spatter.
Cover can be opened/closed easily and quickly from any position. Achieves long unsupported length with a unique structure.
| Inner height | 20.5, 26, 36, 46 |
|---|---|
| Inner width | 15～175 |
| Bending radius | 55～300 |
Open type
High strength, high rigidity, and excellent heat resistance.
Stay bores are machined to optimal hole diameters for cable/hose diameters for best supports protection.
| Inner height | Ordered dimensions |
|---|---|
| Inner width | Ordered dimensions |
| Bending radius | 75～700 |
Open type
High strength and high rigidity.
Simple type that changed TK series stay to an aluminum bar. Cost effective to TK series.
| Inner height | 31, 46 |
|---|---|
| Inner width | 100, 150, 200 |
| Bending radius | 75～300 |
Open type
High strength and high rigidity. Also excellent for heat resistance.
Can be used with high load/low frequency.
Special types such as stainless steel made and circular travel arrangement are also available.
| Inner height | Ordered dimensions |
|---|---|
| Inner width | Ordered dimensions |
| Bending radius | 350, 450, 600, 750 |
Open type
Excellent dynamical function thanks to lightweight.
If the cable/hose to be inserted is relatively lightweight, it can handle long strokes.
| Inner height | 58 (By stays ) |
|---|---|
| Inner width | Ordered dimensions |
| Bending radius | 105～430 |
Can be used for high speed/high frequency.
Suitable for high frequency/long travel length application.
| Inner height | Ordered dimensions |
|---|---|
| Inner width | Ordered dimensions |
| Bending radius | 200, 250, 300, 400 |
Can be used for high speed/high frequency.
Suitable for high frequency/long travel length application.
| Inner height | --- |
|---|---|
| Inner width | Ordered dimensions |
| Bending radius | 175～500 |
CLEANVEYOR
Achieves industry top ultra-low debris generation and cleanliness.
In addition, this is a cable system exclusively for clean rooms that is preassembled with dedicated flexible cables and pneumatic tubes to match the customer's operating conditions.
CLEANVEYOR is a cable system dedicated to clean rooms that achieves zero debris generation.
Achieves ISO class 1 in terms of cleanliness and has a long life that clears more than 10 million bendings. Noise level is as low as 38 dB (A) or less.
Dedicated cables and tubes depending on the operation conditions are preassembled and provided.
TOTALTRAX
Delivery with the necessary cables and hoses preassembled (set) in the cable carrier.
・Applicable for all types of cable carriers
・Either the flexible cable for exclusive use of our cable carrier or the motor cable made by other companies specified by the customer also can be applied.
・Hoses and tubes are available as specified by the customer or equivalent.
・Cables and hoses with attached end connector (assembled with connectors/metal fittings specified by the customer or equivalent) can also be supported.
・Cables (made by other companies), hoses, tubes and end connector specified by the customer can be procured by us or supplied by the customer.
FLATVEYOR
Freestanding flat cable system with Tsubaki cable carrier technology
・Achieves ISO Class 2 cleanliness and contributes to yield rate improvement.
(Based on test results by Germany’s Fraunhofer Institute for Manufacturing Engineering and Automation (IPA) )
・Long travel length that cannot be achieved with flat cables can be accommodated.
・RoHS Compliant Product (Excluding customer-supplied cables and tubes )
・Meeting with us is required to select and order this product.
FLATVEYOR ZP Type
Freestanding flat cable systems with openable structures.
・Developed Tsubaki's original openable tube with good bending properties, durability, and slidability.
Easy insertion and removal of cables and tubes.
・Achieves a cleanliness equivalent to ISO class 2. (From our in-house test results )
・Standardised up to 8 openable tubes.
・RoHS Compliant Product (Excluding cables and tubes to be stored )
