Sprocket ・Pin gear drive
A sprocket is a type of gear and is also called a chain wheel.
A mechanical element that can transmit the rotation of a shaft to a chain or the tension of a chain to a shaft.
Types depend on use of a hub: Type A (flat type), Type B (single hub), Type C (dual hub).
High-strength, corrosion-resistant series are available for use in a variety of situations.
※Sprockets for Plastic modular chains, Top chains and Plastic block chains can be found on the product page for each chain.
What's New / Product Information
Features
- ・When used for drive chain transmission, a large reduction ratio can be achieved by combining the number of teeth. (Usually up to 1:7 )
- ・Choose from a wide range of lineups, including pilot bore products, finished bores and additional bore finishings. (Steel, stainless steel, engineering plastic, surface treatment, etc. )
- ・A range of materials and specifications are available to suit your application.
- ・Sprockets for pin gears with special tooth profiles can be used in combination with attachment chains or pin rack/pin wheel for rotating and linear drive applications instead of power transmission applications.
Construction
RS sprockets are manufactured in four types in conformance with JIS standards.
Model code | A Type (flat plate ) |
B type (Single hub ) |
C type (Dual hub ) |
SD Type (single dual ) |
---|---|---|---|---|
Construction | ||||
Multi-strand Heavy Duty Chain (Super-H, RS-HT, etc.) Note 1 | For using two single-strand chains at the same time | |||
HB type | HC type | |||
Usage by structure | Used when mounting on a rotating body, such as the center member of Torque Limiter. | Most versatile use. | For use with large driven sprockets or when key surface pressure is insufficient with B type. | For using two single-strand chains at the same time. |
Notes
1.The total tooth width (transverse pitch) of multi-strand Heavy Duty chains (HB/HC types) differs from the standard.
Locking system to shaft
The following three types of bores for attaching the sprocket to a shaft are available for RS sprockets.
Series | Appearance | Package |
---|---|---|
Standard pilot bore |
|
|
Fit bore |
|
|
Lock Sprocket |
|
Material and surface treatment
Lineup of specifications and materials to suit your application, such as steel, surface treatment, stainless steel and plastic.
standard steel | Carbon steel for machine structural use | |
---|---|---|
Surface treatment | Carbon steel for machine structure use + Black oxide coating | Available with finished bore (Sprocket Fit bore). |
Carbon steel for machine structure use + electroless nickel-phosphorus plating | Available with finished bore (Sprocket Fit bore). | |
Carbon steel for machine structure use + electro galvanizing (trivalent chromate treatment) | Available with finished bore (Sprocket Fit bore). | |
Carbon steel for machine structure use + other special surface treatment | ||
Environment resistant | Stainless steel , titanium, other special materials | |
Plastic |
Engineering plastic Nylon-based plastic Special MC901 plastic (Blue) ※Only for RS35,40,50,60 |
Sprocket / Pin gear drive unit Product Lineup
- Drive sprocket
- Sprockets for Small Size Conveyor Chains
- Sprockets for Large Size Conveyor Chains
- Pin gear drive
Sprockets for Large Size Conveyor Chains
Here we introduce sprockets for large size conveyor chains.
Standard series of general-use types, Smart replaceable series that reduces time and labors required for replacement, and sprockets for Water treatment chain specialized for water treatment equipment are available.
*For more information on large size conveyor sprockets, please contact us with the chain drawing ready.
- ・Sprocket for Large Size Conveyor Chain
- ・The shaft hole is the pilot bore, and so will require finishing before use.
Size
Metric :RF03~RF36
Imperial size is also standardized.
- ・Sprocket for Large Size Conveyor Chain
- ・Fit Bore Sprockets have finished bores.
- ・It can be used immediately upon delivery.
- ・Machining contents are coded, so you can easily order by just using the model number.
- ・You can select the indicator pins type as an option that allows you to see the tooth's limit of usage at a glance.
Size
Metric size: RF03 to RF17 (R/F/S roller)
Imperial size is also available.
- ・Sprocket for Large Size Conveyor Chain
- ・Solves the problem of time and labor required to replace the sprocket.
Size
Metric :RF03~RF36
Imperial size is also standardized.
- ・Special sprockets for Water Treatment Chain
- ・The tooth block in consideration of corrosion and wear resistance, and the sprocket according to each chain model number can be manufactured.
Size
ACR type, ACS type
JAC type, BF type, others.