Linear actuator
Tsubaki's Linear Actuator includes electric cylinders and jacks that use high-quality in-house screws, and our original Zip Chain-driven Zip Chain Actuators.
Both the screw mechanism and the Zip Chain mechanism can be used in a wide range of applications such as high-speed and high-frequency operation and operation that requires high accuracy by making the best use of the features of the product.
※Zip Chain mechanism is our original technology in which two chains interlock like a zipper to form a single, strong column that can be used by 'pushing and pulling'.
What's New / Product Information
Tsubaki's linear motion takes full advantage of the features of the Zip chain mechanism and screw mechanism, and each product covers the optimum capacity range. Select the most suitable linear motion mechanism for your equipment.
Zip chain mechanism
It is excellent in compactness and has the features of high speed, high frequency, and durability required for high-tact operation.
What is the zip chain ?
Zip Chain is a chain uniquely developed by Tsubaki for pushing and pulling applications.
Two chains lock each other to form a single column, and is named as Zip Chain because it engages like a zipper.
Click here for the special site explaining the details of the Zip Chain mechanism
Special ball screws / Trapezoidal screws mechanism
Ball screw / trapezoidal screw type can be used properly according to the application. A wide range of variations.
Ball screw
- ・Ideal for high-speed, high-frequency applications such as assembly lines.
- ・Highly efficient and compact drive source
- ・Predictable operating life
Trapezoidal Screw
- ・Ideal for low-speed, low-frequency operation such as maintenance applications
- ・Economical with a simple structure
- ・It has self-locking property and load retention is possible.
Linear actuators (electrical cylinders) are actuators that can be used with simple wiring.
They feature easy handling due to not using hydraulics/pneumatics, and enable high performance/reliable operation through the use of a screw and nut mechanism for the cylinder portion.
In addition, they can significantly reduce electricity consumption compared to hydraulic and pneumatic mechanisms, thus making a significant contribution to reducing environmental impact.
Power cylinders with excellent compactness, high-speed operation and expected life contribute greatly to the productivity of equipment. The integrated motor and easy electrical wiring make it ideal for use in various industries and applications, such as steel/port/environmental/various inspection/automobile manufacturing/IT/semiconductor equipments.
There are built-in safety devices for each series for secure operation even when overloaded.
See more about replacing hydraulic and pneumatic cylinders
Ideal for replacing large diameter hydraulic cylinders. !
We added a new model with 50 tons rated thrust that can replace hydraulic cylinders with up to a 250 mm inner diameter.
Cylinder inner diameter mm |
Piston rod diameter mm |
Working pressure | |||
---|---|---|---|---|---|
7MPa | 10MPa | 14MPa | 21MPa | ||
100 | 56 | LPT4000 | LPT4000 | LPU6000 | LPU8000 |
125 | 70 | LPT4000 | LPU6000 | LPU8000 | LPU12000 |
140 | 80 | LPU6000 | LPU8000 | LPU12000 | LPU16000 |
160 | 90 | LPU6000 | LPU12000 | LPU12000 | LPU22000 |
180 | 100 | LPU8000 | LPU12000 | LPU16000 | LPU32000 |
200 | 110 | LPU12000 | LPU16000 | LPU22000 | LPU32000 |
224 | 125 | LPU12000 | LPU16000 | LPU32000 | LPU50000 |
250 | 140 | LPU16000 | LPU22000 | LPU32000 | LPU50000 |
Power Cylinders can solve the problems facing hydraulic cylinders.
Tsubaki Power Cylinders are widely used in various industries as they provide easy control and maintenance with a compact design.
Power cylinders do not require the continuous operation of pumps to maintain thrust like hydraulic cylinders do, so they require only 1/5 the power, which can help reduce running costs as well.
More details on the features with a video
Simplified thrust calculation for hydraulic cylinders (online)
See more about ease of handling
Easy installation and maintenance
The electrification allows for simple system structure, which makes installation and maintenance easier.
Power Cylinders can be driven just by connecting the cables. No need for the kinds of pipes needed with hydraulic lifters, and there is no risk of the kinds of oil leakage from the unit and pipes.
When using hydraulic/air cylinders...
Complicated system structure
When using Power Cylinders…
Simple system structure
Easy control
Power Cylinders can be operated at a stable speed regardless of installation/operation direction. In addition, brake motors allow for energy savings as it is not necessary to supply electricity while retaining the load. Even if there is a blackout or other power outage, there is no danger of falling.
Speed control ・Stop control
Maintains a stable speed regardless of load conditions.
Holds heavy loads
Can retain load wherever it stops.
U Series
Model No. LPUB~/LPUC~
The smaller, lighter U Series Power Cylinder with more than 6 tons rated thrust. (Large capacity: More than 58.8kN )
- ・Lightweight and compact :
Thanks to newly developed special ball screws and bearings, we succeeded in reducing the total length by a max. of 10% and the mass 35% compared with the previous model (T series). The smaller size and lighter weight makes it easy to replace hydraulic cylinders. - ・Complete line-up available :
We added a new model with 50 tons rated thrust, which makes it easy to replace large hydraulic cylinders with a 250 mm inner diameter. - ・Improved cost performance :
In addition to achieving cost reductions compared to previous models thanks to smaller and lighter parts, the power cylinder is electrical so it has much better power savings than hydraulic types, greatly reducing power consumption.
Rated Thrust kN
58.8~490
Speed mm/s
6.5/7.8~43/52
Stroke mm
500~2000
U Series Multi Type
Model No. LPUA□□□□B~ LPUC□□□□B~
The Multi Type Power Cylinder is capable of synchronizing multiple cylinders with one motor. (Large capacity: More than 58.8kN )
- ・High-speed Operation :
MTO products can achieve high-speed operation up to 150mm/s. - ・Safe :
A thrust detection unit can be built-in to detect overload and protect the machine. (LPUC) - ・Rugged construction :
The actuator area supporting the load and the reducer area are separated. Fluctuating loads will not affect the contact on the gear teeth. - ・Drive multiple units together :
Using an input shaft with enough strength allows synchronous operation of multiple units. - ・Capable of oscillation :
The input shaft and trunnion area have the same shaft center, allowing for swinging motion during interlocked operation.
Allowable Thrust kN
58.8~313
Speed mm/s
6.5/7.8~43/52
Stroke mm
500~2000
T Series
Model No. LPTB~/LPTC~
A power cylinder in the medium thrust zone that can be used with an AC (alternating current) power supply. (Medium capacity 39.2kN or less )
- ・Two safety mechanisms :
You can choose the type according to the protection method. TB Type has a built-in wet slip clutch. The TC Type comes with a thrust detecting limit switch. - ・Wide variation :
A wide range of standard models are available depending on the application, thrust, and speed.
You can choose the thrust from between 2.45kN and 39.2 kN, and the speed from 9mm/s and 120mm/s. - ・Positive actuation :
A highly-reliable safety device is built into all series so as to work effectively against overload. - ・Wide variety of options :
Two types of stroke adjusting limit switches (external and internal types) and stroke sensors (potentiometer and rotary encoder types) are available, allowing for much easier control by a sequencer.
Rated Thrust kN
2.45~39.2
Speed mm/s
9/11~100/120
Stroke mm
200~1500
T Series Multi Type
Model No. LPTB□□□□B~ LPTC□□□□B~
Capable of synchronizing multiple cylinders with one motor. (Medium capacity 39.2kN or less )
- ・Safe :
A thrust detection unit can be built-in to detect overload and protect the machine. (LPTC) - ・Rugged construction :
The actuator area supporting the load and the reducer area are separated. Fluctuating loads will not affect the contact on the gear teeth. - ・Drive multiple units together :
Using an input shaft with enough strength allows synchronous operation of multiple units. - ・Capable of oscillation :
The input shaft and trunnion area have the same shaft center, allowing for swinging motion during interlocked operation.
Allowable Thrust kN
4.94~39.2
Speed mm/s
72~120
Stroke mm
200~1500
Worm Series
Model No. LPWB~
Worm series is the perfect power cylinder to replace hydraulic cylinders.
- ・Worm Series LPWB provides large thrust by using a high precision worm gear and a highly efficient ball screw manufactured with technology based on nearly a century of manufacturing tradition.
- ・Clean :
There are no hydraulic pumps or pipes, so no worries about oil leakage from the connecting parts. - ・Easy installation :
No need for hydraulic pumps and pipes. Can be operated just by connecting a three-phase power source. - ・Accurate control :
Changing speeds and accurate positioning are possible by using an inverter. - ・Low cost :
Reduces costs by significantly reducing the number of parts. - ・High load capacity :
Can be used with large loads like jacks can thanks to its special steel alloy.
Rated Thrust kN
49~294
Speed mm/s
5~72(Reference )
Stroke mm
200~2000(Reference )
G Series
Model No. LPG~
A power cylinder with a small thrust zone that can be used with an AC (alternating current) power supply. (Capacity 3.00kN or less )
- ・Wide variation :
Approximately 9000 models are standardized, including 630 basic types and models with optional parts. - ・Stable, high efficiency, longevity :
High efficiency has been achieved by employing nut material that has excellent compatibility with the aligning trapezoidal screw thread (centralizing screw) specially designed for the Power Cylinder, which provides stability and a long operating life. - ・The type of screw can be selected according to the application. :
The Power Cylinder G Series basically uses a trapezoidal screw. For high frequency or long life operation, consider using the ball screw type. - ・Silent operation :
Significantly reduced noise during startup and stopping through a quiet DC brake motor drive. - ・Excellent speed stability :
Operations at a steady velocity is possible that is impervious to load fluctuations.
Rated Thrust N
700~3.00k
Speed mm/s
25/30~200/240
Stroke mm
100~1200
F Series
Model No. LPF~
A small thrust type power cylinder for driving with a DC (battery) power supply.
- ・Compact, lightweight, efficient use of installation space :
Compact design with the right angled connection between the actuating part and motor unit. Due to the right angled two-way clevis holes, you can choose from four mounting directions so as not to interfere with another machine. - ・Outdoor Use :
This unit is ideal for outdoor applications, such as farming machines and vertical parking carousels. - ・Wide variety of options :
Variety of options are available such as a position detecting unit and an overload detecting unit.
Rated Thrust N
100~6.00k
Speed mm/s
8~54
Stroke mm
50~600
Eco Series Servo Type
Model No. LPES~
Can support high-speed and high-precision operation so that the performance of the servo motor can be maximized.
- ・Maximizing Servomotor Performance :
The combination of a high-efficiency ball screw and highly rigid lightweight disk coupling maximizes the servomotor performance. - ・High Stopping Accuracy :
The high-precision ball screw delivers high stopping accuracy. Repeated positioning accuracy is within ±0.02mm, and stopping accuracy is within ±0.1mm. - ・Benefits of Precision Planetary Reducer Type :
By downsizing the servomotor you can save on initial costs with smaller peripheral devices such as an amplifier, while reducing running costs through lower power consumption. - ・Allows selection of the servomotor :
Desired servomotors can be installed. Please specify the servomotor manufacturer or mount code when asking for a quotation. - ・High-Speed, Wide Thrust Range :
Can be used at high-speed and in a wide thrust range.
Rated Thrust N
150~15.0k
Speed mm/s
1~333
Stroke mm
300~1000
Eco Series CDS Type
Model No. LPE~
Ideal for use in two-point operation such as air cylinders. Features self-contained functions that detect overcurrent.
- ・Self-contained :
With a spring built in the linear actuating part and the CDS (Current Detective System) mounted in the terminal box, overcurrent is detected even when press contact stops or in the case of overload, and the motor is automatically stopped.
During stoppage, the pressing force is maintained by the built-in spring. - ・Lower running costs, environmentally-friendly :
This electrically operated type consumes electricity only when used, allowing for economical operations. There is no need to operate a compressor all the time like in an air system, so a significant reduction in running costs can be expected. - ・High-Frequency Operation & Long Life :
Capable of a maximum of 15 times/min high-frequency operation. With the ball screw, a long service life of 1 million strokes can be expected. - ・Simple operation :
Can be operated just by connecting a three-phase power source. No limit switch for stroke adjustment is required, saving you the hassle of wiring. Also compatible with long-distance wiring.
Rated Thrust N
250~1.00k
Speed mm/s
90/90/110~160/190/200
Stroke mm
100~600