Top Roller Chains
- Top rollers are attached to a base conveyor chain between pitches, allowing for direct support of conveyed items.
- Top rollers available in engineering plastic and bearing roller specs as well.
- ※Cannot use standard sprockets. Contact a Tsubaki representative regarding special sprockets for this chain.
Catalogs ・Instruction Manuals
Application
- ・Chain can be run continuously while conveyed items on top of a conveyor can be accumulated temporarily with a stopper.
- ・Conveying and stopping can be performed simultaneously on top of the same chain.
- ・Alleviates shock impact during operation.
List of Models
※Click to see detailed information.
※Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain.
This value will differ by manufacturer and is not a guaranteed value.
※Contact a Tsubaki representative regarding average tensile strength.
Size | Roller type |
Pitch | Roller diameter |
Inner width of inner link |
Top Roller diameter | ||||
---|---|---|---|---|---|---|---|---|---|
75mm | 100mm | 150mm | 152.4mm | 200mm | Φmm | mm | Φmm | ||
RF03 | R | RF03075R-TR | RF03100R-TR | --- | --- | --- | 31.8 | 16.1 | 40 |
RF05 | R | --- | RF05100R-TR | RF05150R-TR | --- | --- | 40 | 22 | 40 |
RF08 | R | --- | --- | RF08150R-TR | --- | --- | 44.5 | 27 | 40 |
RF10 | R | --- | --- | RF10150R-TR | --- | --- | 50.8 | 30 | 50.8 |
RF6205 | R | --- | --- | --- | RF6205R-TR | --- | 57.2 | 37.1 | 57.2 |
RF12 | R | --- | --- | --- | --- | RF12200R-TR | 65 | 37.1 | 65 |
RF17 | R | --- | --- | --- | --- | RF17200R-TR | 80 | 51.4 | 80 |