Shock Monitor TSM4000M2 Series
- For machine tools. Integral power type
- Detects overload and tool wear by integrating one cycle of power from the manufacturing process.
Features
- ・With the constant pressure of a finishing machine, even if the tool wears, the load ratio does not rise while the machining time increases. This is monitored in the power consumption (area).
- ・After machining is completed, the wear is detected by the upper limit of power integration (OUT2), while the drill breakage can be detected by the lower limit (OUT1).
- ・With the instantaneous value of OUT3, overload due to jams is monitored with the absolute value.
- ・As a set, OUT1, OUT2, and OUT3 can be switched from the external for a maximum of 8 types. It accommodates the change of tools and workpieces.
- ・The integral time setting can be changed easily.
TSM4000M2 Basic Operation
Catalogs ・Instruction Manuals
List of Model Numbers
※Click the model No. for detailed information.
Standard type main unit and current sensor | Panel mounting type main unit and current sensor | Main unit only | Panel mounting bracket | Current sensor | Sensor cable | Double voltage resistor | I/O cable |
---|---|---|---|---|---|---|---|
TSM4000-U010 | TSM4000P-U010 | TSM4000M2 | TSM4-PL1 | TSM-U010 | TSM4-S01
TSM4-S03 TSM4-S05 TSM4-S10 TSM4-S20 TSM4-S30 |
TSM4-PR1 | TSM4-C01
TSM4-C03 |
TSM4000-U050 | TSM4000P-U050 | TSM-U050 | |||||
TSM4000-U100 | TSM4000P-U100 | TSM-U100 | |||||
TSM4000-U150 | TSM4000P-U150 | TSM-U150 | |||||
TSM4000-U200 | TSM4000P-U200 | TSM-U200 | |||||
TSM4000-M300 | TSM4000P-M300 | TSM-M300 | |||||
TSM4000-M400 | TSM4000P-M400 | TSM-M400 | |||||
TSM4000-M600 | TSM4000P-M600 | TSM-M600 | |||||
TSM4000-M800 | TSM4000P-M800 | TSM-M800 |