Chain tensioner

Product photo
  • Adjust slackness in the chain to enable continuous and proper chain operation.
  • Excessive chain sag can cause vibration and excessive noise and prevent the chain from properly engaging the sprocket, which prevents the chain from operating smoothly.
  • To eliminate the chain slackness, we provide four types of chain tensioners: TH type, TCS type, ETS type and TA type.
The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co.
Please direct your inquiries regarding the CAD data service or PARTcommunity to:
 CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032

Catalogs ・Instruction Manuals

Using Chain Tensioners

There are four types of Tsubaki Chain Tensioners: TCS type, ETS type, TA type, and TH type.
Click on each below to learn more about how to use them.

Relationship between chain tensioner displacement and pressing force

  • ・There are two coil springs located inside the chain tensioner body. Using the elasticity of these springs, the idler sprocket or plastic shoe on the end of the tensioner pushes down on the chain, thereby adjusting its slack.
  • ・Click the button below to see the ways to express the relationship between the displacement of the idler sprocket or plastic shoe and the acting pressing force. Use these as a guide for installation and adjustment.

Construction

Tsubaki Chain Tensioners are composed of a main unit and an idler sprocket. (TA type is an integrated model with a plastic shoe. )
The main (aluminum) tensioner unit uses the elasticity of an embedded coil spring for tensioning.


[Click to enlarge ]

The idler sprocket part is made up of a sprocket with embedded bearings (TH type includes the option of an oilless bush), mounting bolts, and washers.
The sprocket teeth have been induction hardened, TCS & ETS types are coated black, and TH type is plated.

Notes for use

  • ・Chain vibration will cause the tensioner rod to move in and out of and slide between the body. This in turn will accelerate rod and tensioner wear. Always lubricate between rod and tensioner body.
  • ・We advise against using chain tensioners in dusty, corrosive, or other extreme environments as this may severely damage the tensioner.
  • ・The tensioner may suffer severe damage when there are additional thrust forces acting on the tensioner (as with a vertical drive) and under severe additional load fluctuations (as with forward-reverse operations). Avoid these where possible.

Types

1. TCS Type Swinging type with idler sprocket


[Click to enlarge ]
Model No. Main unit code Applicable
Chains
Swing
Angle
Dimensions  mm Pressing Force
kN { kgf }
Estimated Mass
kg
DXF drawings
3D CAD data
Standard Price Delivery
B C H M T1 T2 T3 L L1 L2
CT-TCS40 TC-1 RS40-1 45゚ 69 86.5 121 M10 15.5 15.5 5 50.5 37.5 6.5 0 {0}

0.15 {15}
0.74 DXF・3DCAD Contact us for details. Contact us for details.
CT-TCS50 RS50-1 0.82 DXF・3DCAD Contact us for details. Contact us for details.
CT-TCS60 TC-2 RS60-1 30゚ 90 100 145 M12 18 18 7 60.5 44.5 8.5 0 {0}

0.39 {40}
1.3 DXF・3DCAD Contact us for details. Contact us for details.
CT-TCS80 RS80-1 65.5 47 11 1.52 DXF・3DCAD Contact us for details. Contact us for details.
Model No. No. of Sprocket Teeth :Z DP
mm
DO
mm
Sprocket Mounting Bolt Flat washers
Size :O Length
mm
Strength Classification Nominal Quantity
CT-TCS40 17 69.12 76 M10 30 10.9 10 2
CT-TCS50 15 76.35 84
CT-TCS60 13 79.60 89 M12 35 10.9 12 2
CT-TCS80 11 90.16 102 4

2. ETS Type Linear type with idler sprocket


[Click to enlarge ]
Model No. Main unit code Applicable
Chains
Stroke
S
mm
Dimensions  mm Pressing Force
kN { kgf }
Estimated Mass
kg
DXF drawings
3D CAD data
Standard Price Delivery
H H1 F G B N T1 T2 E L L1 L2
CT-ETS40 TO-1 RS40-1 30 129 74 7 58 56.2 11 23 20 12.5 42 29 6.5 0.10 {10}

0.25 {25}
0.6 DXF・3DCAD Contact us for details. Contact us for details.
CT-ETS50 RS50-1 0.69 DXF・3DCAD Contact us for details. Contact us for details.
CT-ETS60 TO-2 RS60-1 38 163 87 9 70 70.5 12.5 28 25 15 52 36 8.5 0.15 {15}

0.39 {40}
1.15 DXF・3DCAD Contact us for details. Contact us for details.
CT-ETS80 RS80-1 57 38.5 11 1.37 DXF・3DCAD Contact us for details. Contact us for details.
Model No. No. of Sprocket Teeth :Z DP
mm
DO
mm
Sprocket Mounting Bolt Flat washers
Size :O Length
mm
Strength Classification Nominal Quantity
CT-ETS40 17 69.12 76 M10 35 10.9 10 2
CT-ETS50 15 76.35 84
CT-ETS60 13 79.6 89 M12 45 10.9 12 2
CT-ETS80 11 90.16 102 4

3. TA Type Linear type with plastic shoe


[Click to enlarge ]
Model No. Main unit code Applicable
Chains
Stroke
S
mm
Dimensions  mm Pressing Force
kN { kgf }
Estimated Mass
kg
DXF drawings
3D CAD data
Standard Price Delivery
H H1 F G B N T1 E W R T2
CT-TA40 TO-1 RS40-1
RS08B-1
30 143 74 7 58 56.2 11 23 12.5 140 120 20 0.10 {10}

0.25 {25}
0.39 DXF・3DCAD Contact us for details. Contact us for details.
CT-TA50 TO-2 RS50-1
RS10B-1
38 164 87 9 70 70.5 12.5 28 15 140 140 22 0.15 {15}

0.39 {40}
0.65 DXF・3DCAD Contact us for details. Contact us for details.
CT-TA60 RS60-1
RS12B-1
DXF・3DCAD Contact us for details. Contact us for details.
CT-TA80 TO-3 RS80-1
RS16B-1
44 187 104 9 86 82 14.5 33 17.5 140 160 25 0.29 {30}

0.59 {60}
0.99 DXF・3DCAD Contact us for details. Contact us for details.

4. TH Type Linear type without idler sprocket

Main unit

Model No. Stroke
S
mm
Spring Pressing Force
N
DXF drawings
3D CAD data
PDFDrawings
Standard Price Delivery
Minimum Maximum
CT-TH1 25 39.2 117.6 DXF・3DCAD PDF Contact us for details. Contact us for details.
CT-TH2 45 98.0 294.0 DXF・3DCAD PDF Contact us for details. Contact us for details.

[Click to enlarge ]

Adapter (base for attachment)

Model No. Applicable Chain
Tensioner
DXF drawings
3D CAD data
Standard Price Delivery
CT-THS1 CT-TH1 DXF・3DCAD Contact us for details. Contact us for details.
CT-THS2 CT-TH2 DXF・3DCAD Contact us for details. Contact us for details.

[Click to enlarge ]

Idler Sprocket


[Click to enlarge ]
Model No. No. of Idler Teeth Pitch Diameter
Dp
mm
Outer Diameter
Do
mm
Max. Rotation Speed
r/min
Allowable Bearing Load
N
DXF drawings
3D CAD data
PDFDrawings
Standard Price Delivery
Ball Bearing
Series
RS35-THB20T 20 60.89 66 3000 3300 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS40-THB15T 15 61.08 67 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS50-THB15T 15 76.35 84 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS60-THB14T 14 85.61 95 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS80-THB11T 11 90.16 102 DXF・3DCAD PDF Contact us for details. Contact us for details.
Lube-free Bush
Series
RS35-THL20T 20 60.89 66 2500 343 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS40-THL15T 15 61.08 67 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS50-THL15T 15 76.35 84 DXF・3DCAD PDF Contact us for details. Contact us for details.
RS60-THL14T 14 85.61 95 DXF・3DCAD PDF Contact us for details. Contact us for details.