Power Lock RE-SS series Hub movement amount during assembly

The hub will move when connecting a shaft and hub to a Power-Lock RE Series using a straight mounting method without a snap ring.

This hub movement amount is affected by the amount of elastic deformation of the shaft and hub, and varies depending on the hub's inner and outer diameter ratio aN. See table below.

aN = DN/D D：Inner Hub Diameter mm DN：Outer Hub Diameter mm

Hub movement amount (mm)

Model No.	aN=3	aN=2	aN=1.5
PL005X018RE-SS	0.06	0.07	0.10
PL006X019RE-SS	0.06	0.07	0.10
PL008X021RE-SS	0.08	0.09	0.13
PL010X026RE-SS	0.11	0.13	0.18
PL011X027RE-SS	0.12	0.14	0.19
PL012X028RE-SS	0.14	0.17	0.23
PL014X030RE-SS	0.15	0.18	0.25
PL015X031RE-SS	0.16	0.19	0.25
PL016X032RE-SS	0.15	0.18	0.25
PL017X033RE-SS	0.14	0.17	0.23
PL018X034RE-SS	0.14	0.17	0.23
PL019X035RE-SS	0.19	0.22	0.30
PL020X039RE-SS	0.24	0.29	0.39
PL022X041RE-SS	0.24	0.29	0.39
PL024X043RE-SS	0.31	0.36	0.49
PL025X044RE-SS	0.30	0.36	0.48
PL028X049RE-SS	0.33	0.39	0.53
PL030X050RE-SS	0.34	0.40	0.54
PL032X052RE-SS	0.33	0.39	0.53
PL035X058RE-SS	0.38	0.45	0.60
PL038X060RE-SS	0.44	0.52	0.70
PL040X063RE-SS	0.44	0.52	0.70
PL042X065RE-SS	0.49	0.58	0.79
PL045X068RE-SS	0.50	0.59	0.80
PL048X072RE-SS	0.55	0.65	0.88
PL050X075RE-SS	0.56	0.67	0.90