Plastic top chain Snap top chain TN type
- Chain pitch
19.05mm - Straight running
- Steel chain-based straight running chain with large allowable load
- Also possible to replace only top plate
Features
- ・Suitable for conveyors with large capacity thanks to high allowable load. (Excluding SS and PC )
- ・Replacing top plates is simple and easy.
- ・Base chain types available for operating environments where corrosion could be a problem.
- ・Can use RS60 sprocket (teeth 12T).
■Application
The following are the industries we recommend.
May not be used depending on conveying capacity (conveyor speed), material to be conveyed (weight, shape), environment and application.
Use as a guide when selecting.
Contact us if there are any applications or conditions not described.
Recommended industry /Conveyed material size (●:Recommended ○:Can be used △:Varies depending on conveying conditions. )
Conveying size (Weight ) |
Industry | ||||||||
---|---|---|---|---|---|---|---|---|---|
Can manufacturing | Beverages | Tire | Mechanical parts | Logistics | Pharmaceuticals | Bakery/Food | Secondary battery | Semiconductor ・ Solar panel related |
|
High | ● | ● | △ | ● | ● | △ | △ | △ | △ |
Medium | ● | ● | △ | ● | ● | △ | △ | △ | △ |
Low | ● | ● | △ | ● | ● | △ | △ | △ | △ |
Application
- ■Ideal for layouts with longer conveying distances, or for conveying heavy loads
List of Models
■Base chain specifications
- ・Standard Series :
Base chain is made of steel and main dimensions are the same as standard roller chain, however the shape of pin ends is different.
Note that the strength is lower than RS roller chain.
- ・NP Series (Ni plating ):
Base chain is nickel-plated to standard series.
Nickel plating makes for a better appearance, and is hard to rust.
- ・LMCNP Series (Lambda ):
By using a special oil-impregnated bush that uses NSF H1 compatible oil for nickel-plated base chain, it can be used without lubrication (Lambda) and with a long service life.
- ・SS Series :
All base chain components are made of 18-8 stainless steel, and can be used in an environment where corrosion resistance is prioritized.
- ・PC series :
Poly-steel chain (TN-C-PC) is used for base chain. Joint link is dedicated for TN type
Note that the strength is lower than RS roller chain.
This top chain is made of engineering plastic and 18-8 stainless steel, provides corrosion resistant, lube-free, low noise operation.
Notes
1.Standard, NP and SS series require lubrication to base chain section.
2.Contact a Tsubaki representative if SS series chain will be used in special atmospheres.
※Click "model" for more information
Chain pitch mm | 19.05 | ||||
---|---|---|---|---|---|
Application | Straight running | ||||
Chain type | - | ||||
- | |||||
Base chain specifications | Standard Series | NP Series | LMCNP Series | SS Series | PC series |
Pin type | - | ||||
Pin material | - | ||||
Pin shape | - | ||||
Top plate thickness mm | - | ||||
Material of the pusher | - | ||||
Other functions | - | ||||
Model | TN | TN-NP | TN-LMCNP | TN-SS | TN-PC |
Chain width mm | 82.6, 101.6, 114.3, 127.0, 190.5 |
||||
Formation units | - |