TCL Automatic Conveyor Chain Lubricator
- TCL lubricator is designed for automatic use with conveyor chains.
- Chain roller pushes up a checker arm on a lubricator pump, activating a pump and causing an appropriate amount of lubrication to discharge from nozzles.
- Thus, no electric or other power source is required, making installation easy and exact, and stable lubrication possible.
Features
-
・No Power Source Required
Lubricator pump is activated when a chain runs, making electric, air, or other power sources unnecessary. Installation and maintenance are a snap!
-
・Correct Lubrication
Lubrication is in tandem with chain operation for correct, stable lubrication every time.
-
・Compact, Low Price
Lighter and more compact than existing conveyor chain lubricators, making it easy to handle and cost effective.
Contents of Unit
Tsubaki's automatic lubricators reduce conveyor chain wear, running resistance and noise.
TCL4
TCL2
■ Contents of Unit
- 1. Unit pump :1 units
- 2. Oil Tank (5L):one
- 3. Rubber Hose (2m):one
- 4. Steel Pipe (2m):TCL2 Type two 、TCL4 Type four
- 5. Nozzle :TCL2 Type two 、TCL4 Type four
- 6. Nozzle Attachment Fitting :TCL2 Type 1 set 、TCL4 Type 2 sets
[Angle material :1、Nozzle attachment board :2]
Lubricator Performance
Types | TCL4 | TCL2 |
---|---|---|
Nozzle | 4 ports | 2 ports |
Number of Operations | Max. 3 times/sec. Refer to a products list for allowable chain pitch and speed. |
|
Discharge Amount | Fixed 0.05cc/shot/nozzle | |
Timing Sensor | Checker arm sensor | |
Start/Stop (ON・OFF) | Replace checker arm manually after stopping a conveyor. | |
Oil Tank | 5L | |
Operating temperature | -10℃~120℃ |
Note: Operational temperature is a temperature at which a nozzle tip can function. Operational temperature of an actual unit is -10℃ to 60℃.
Catalogs ・Instruction Manuals
Model No. examples
TCL4 | - | R | |
| Size TCL4:4 nozzles TCL2:2 nozzles |
| Chain Direction of Travel R:Right when looking at chain from checker arm side L:Left when looking at chain from checker arm side |
List of Models
※Click to see detailed information.
Nozzle | |||
---|---|---|---|
4 ports | 2 ports | ||
Direction of travel | Right (R) | TCL4-R | TCL2-R |
Left (L) | TCL4-L | TCL2-L |